What is Molybdenum Silicide MoSi2 Powder?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The price of nickel and stainless steel rose together. Nickel afternoon hand in hand with stainless steel together turn red up. Due to the temporary easing of geopolitical risks, risk assets are now picking up, nonferrous metals, stock markets, and so on have risen, the overall mood has temporarily improved. Ore prices are strong, the overlay of the epidemic on spot logistics or the formation of a certain impact. Phase, nickel and stainless steel materials to maintain high wide concussion pattern.

Nickel prices based on low inventory, tight supply and demand will still show high wide fluctuations. In addition, the current LME has low liquidity, so its sensitivity to capital will remain relatively high. Shanghai nickel-wide fluctuations are expected to continue in the 200,000-250,000 yuan wide repeated fluctuation trend. While stainless steel is affected by the stronger nickel pig iron, the cost support continues, but note that under the current demand is not effectively released, the upward space may also be affected, the stage is expected to fluctuate between 20000 and 22,000 yuan. The price of nickel produced such fluctuations, indicating that the price of the MoSi2 Powder may also be affected to a certain extent.

Introduction to Molybdenum Silicide MoSi2 Powder
Molybdenum silicide was discovered in 1906. Under different conditions, silicon and molybdenum can form molybdenum trisilicide (Mo3Si), molybdenum pentasilicate (Mo5Si3), and molybdenum disilicate (MoSi2). The most important one is the Molybdenum disilicide (MoSi2), which is a Dalton-type intermetallic compound. The atomic combination in its crystal structure shows the coexistence of metal bonds and covalent bonds, and has excellent high-temperature essential characteristics.
Molybdenum disilicide is an inorganic compound, the chemical formula is MoSi2, gray metal solid. Insoluble in most acids, but soluble in nitric acid and hydrofluoric acid. The two kinds of atoms have similar radii and electronegativity, which is similar to metal and ceramic.  Molybdenum disilicide is electrically conductive and at high temperatures forms a passivation layer of silicon dioxide on the surface to prevent further oxidation.
It can be applied as high-temperature oxidation-resistant coating materials, electric heating elements, integrated electrode film, structural materials, composite reinforcement, wear-resistant materials, structural ceramics, and other fields of bonding materials. 
 
Physicochemical Properties of Molybdenum Silicide MoSi2 Powder
MoSi2 is a kind of intermediate phase with the highest silicon content in the Mo-Si binary alloy system, and it is a Dalton-type intermetallic compound with a fixed composition. It has dual characteristics of metal and ceramic, and is a kind of high-temperature material with excellent performance. Good high-temperature oxidation resistance, oxidation resistance temperature up to 1600℃, and SiC equivalent; Moderate density (6.24g/cm3); Low thermal expansion coefficient (8.1×10-6K-1); Good electric conductivity; Higher brittle and ductile transition temperature (1000℃) below the hard brittleness of ceramics. Above 1000℃ it is metal-like soft plastic. MoSi2 is mainly used as heating elements, integrated circuits, high-temperature oxidation-resistant coating, and high-temperature structural material. 
In MoSi2, molybdenum and silicon are bonded by metal bonds, while silicon and silicon are bonded by covalent bonds. Molybdenum disilicide is gray tetragonal crystal. Insoluble in general mineral acids (including aqua roya), but soluble in nitric acid and hydrofluoric acid mixed acid, has good high-temperature oxidation resistance, can be used as high temperature (<1700℃) oxidation atmosphere work heating element. 
In an oxidizing atmosphere, a protective film is formed on the surface of dense quartz glass (SiO2) burned at a high temperature to prevent continuous oxidation. When the temperature of the heating element is higher than 1700℃, SiO2 protective film is formed, which is thickened at the melting point of 1710℃ and fused with SiO2 into molten droplets.  It loses its protective ability due to its surface-extending action. When the element is used continuously under the oxidant, it forms a protective film again. It should be noted that this element cannot be used for long periods at 400-700℃ due to strong oxidation at low temperatures.
 

Molybdenum Silicide MoSi2 Powder CAS 12136-78-6
 

 
Applications of Molybdenum Silicide MoSi2 Powder
MoSi2 is widely used in heating elements. Molybdenum disilicide heating elements can be used at temperatures up to 1800°C for electric furnaces used in laboratories and production environments in glass, steel, electronics, ceramics, and for heat treatment of materials. Although these components are brittle, they can operate at high power without aging, and their resistivity does not increase with operating time.
 
Main Supplier of Molybdenum Silicide MoSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality molybdenum silicide MoSi2 powder, please feel free to contact us and send an inquiry. ([email protected])
 

For Germany, the largest economy in Europe, the impact of the Russian-Ukrainian conflict on the natural gas market is the most obvious. This also exposed the serious dependence of some German industrial enterprises on Russian natural gas. Some analysts pointed out that the instability of natural gas supply has had a big impact on the German economy and threatened its market competitiveness because alternative energy supplies will not be cheap and difficult to come quickly. Increased uncertainty over natural gas supplies is putting enormous pressure on German manufacturers in sectors ranging from steelmaking to chemical MoSi2 Powder for the time being, but the market demand for MoSi2 Powder in the future will also change with the influence of various external factors. If you need MoSi2 Powder, please feel free to contact us.

Inquiry us