Products

  • 0
  • 0

High Purity 3D Printing Inconel Alloy In625 Powder

Recently, covid 19 outbreak spreads in Shanghai, China. There are more than 25,000 new asymptomatic domestic infections every day. China is implementing a dynamic zero-out policy. A leading respiratory expert said the key to COVID-19 prevention and control is to minimize transmission and fatality rate. Omicron has a low case fatality rate but is highly transmissible and can still claim many lives in large outbreaks. "Total openness is not applicable in China.  For China, we should keep to the dynamic zero-out and gradually open up."  

However, "dynamic zero clearance" is not the pursuit of complete "zero infection".  As the Novel Coronavirus has its own uniqueness and strong concealment, there may be no way to prevent the detection of cases at present, but rapid detection and prompt treatment must be carried out, as soon as one case is found, one case will be dealt with.  

The situation in Shanghai is serious. As the financial center of China, Shanghai is a very important city, and the outbreak of the epidemic in Shanghai will put a great impact on China's economy.  The current task is to contain the spread of the epidemic as soon as possible, to achieve social zero so that Shanghai's life and economy quickly return to normal.  

As China plays an important role in the global supply chain, the outbreak will have a significant impact on the supply and prices of many Inconel 625 Powder.

About 3D Printing Inconel Alloy In625 Powder:
Inconel 625 is a high-performance nickel-based superalloy known for its high level of strength, high temperature and corrosion resistance. This superalloy consists mainly of nickel (at least 58%), followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace amounts of manganese, silicon, aluminum, and titanium. It can withstand high pressures and a wide range of temperatures. Inconel 625 has a melting point of about 1300°C and a thermal expansion coefficient of 1.28 × 10-5 1/K(at 20°C). It can resist all kinds of extreme temperatures from low to very high.

Inconel625 has a density of 8.4 g/cm3 and a melting point of 1290-1350℃. It has excellent corrosion resistance to inorganic acid and various corrosive media in oxidation and reduction environments. Resistant to carbonation and oxidation in static or circulating environments, and to chlorine-containing gas corrosion

Inconel625 alloys exhibit excellent corrosion resistance in many media. Its excellent resistance to pitting, crevice, intergranular corrosion and erosion in chloride media, as well as its ability to resist corrosion in highly acidic environments, make it a suitable choice for nuclear and marine applications.

625 alloys exhibit excellent corrosion resistance in a wide range of media. Excellent resistance to pitting, crevice corrosion, intergranular corrosion and corrosion in chloride media. It has good corrosion resistance to inorganic acids, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid, etc. At the same time, it also has alkali and organic acid corrosion resistance in oxidation and reduction environments. Effective resistance to chloride ion reduction stress corrosion cracking. It is almost non-corrosive in seawater and industrial gas environments and has high corrosion resistance to seawater and salt solutions, as well as at high temperatures.No sensitivity during welding. Resistant to carbonation and oxidation in static or circulating environments, and to chlorine-containing gas corrosion. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Inconel Alloy In625 Powder in bulk.

Composition for nickel based alloy powder In625 (percentage by mass):

Cr

Mo

Co

Nb

Al

S

Ni

20-23

8-10

1 max

3.15-4.15

0.4 max

0.015 max

Bal

 

Ti

C

Fe

Mn

Si

P

Cu

0.4 max

0.1 max

5 max

0.5 max

0.5 max

0.015 max

0.07 max

 

category

Alloy grades and characteristics

Alloy number:

Nickel-based alloy IN625 powder

Particle size:

15-45μm, 15-53μm, 53-120μm, 53-150μm

Morphology:

Spherical

Appearance:

Grey

Package:

Aluminum bag, Vacuum packing

Application:

3D printing metal powder

Other applications:

powder metallurgy(PM), injection molding(MIM), spraying coating(SP) etc.


How is 3D Printing Inconel Alloy In625 produced?
The production and composition of the Inconel 625 depend on the specifications required for the material.
In order to improve the toughness of the material, heat treatment of the alloy is necessary.In the case of Inconel 625, the following treatments can be used:

High solution annealing: Soak at 1095-1205 ° C (up to 1 hour), then the lower temperature in ambient air or cooling medium. The result is an alloy with superior creep resistance.

Low solubility annealing: This is similar to high solubility annealing but at a lower temperature of 925-1040°C.The alloys produced have good tensile strength and ductility.

Stress relief: This process involves soaking at 900°C for up to 4 hours, followed by cooling in the surrounding air. The final product has excellent integrity in low-temperature environments, as well as optimal strength and stress resistance.
Forging Inconel 625 requires a furnace temperature between 1010 °C and 1150°C. Anything below this range may cause hardness and require reheating of the material.

Applications of 3D Printing Inconel Alloy In625 Powder:
Inconel 625 applications
After softening annealing, low carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength enable it to be used as a thinner structural component.625 alloy can be used in contact with seawater and subjected to high mechanical stress.

Marine application
Due to its high corrosion resistance, especially pitting and cracking resistance, the Inconel 625 is ideal for high-salt, subsea applications. The material is used as propeller blades for ships, mooring lines for fixing ships and similar ships, accessories and fixtures for submarines, and components for marine equipment.

Aerospace equipment
The superalloy has also found its way into the aircraft industry, especially for exhaust equipment, fuel pipes, heat exchanger casings and rocket parts.That's because the Inconel 625 works well even at extreme temperatures and pressures.

Nuclear technology
Inconel 625's strength and corrosion and stress resistance make it a suitable component for nuclear reactors, especially control rods and cores. Nuclear systems also typically involve temperatures in excess of 650°C, which Inconel 625's strength can withstand.

Industrial processes
Because the alloy is easy to manufacture and resistant to high temperatures and corrosion, it is a useful component in the production of manufacturing equipment such as vessels, heat exchangers, valves and fluid distribution systems. Its excellent weldability also makes it a suitable component for pipes used in manufacturing plants.

Storage Condition of Inconel Alloy In625 Powder:
The damp reunion will affect In625 powder dispersion performance and using effects, therefore, Inconel alloy In625 powder should be sealed in vacuum packing and stored in a cool and dry room, the Inconel alloy In625 powder can not be exposure to air. In addition, the Inconel alloy In625 powder should be avoided under stress.

Packing & Shipping of Inconel Alloy In625 Powder:
We have many different kinds of packing which depend on the Inconel alloy In625 powder quantity.
Inconel alloy In625 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Inconel alloy In625 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com


Inconel Alloy In625 Powder Properties

Other Names INCO 625
CAS No. N/A
Compound Formula Ni Cr Fe Mo Nb
Molecular Weight N/A
Appearance Metallic Powder
Melting Point 1290-1350 °C
Solubility in water N/A
Density N/A
Purity 99%
Particle Size 15-45μm, 15-53μm, 53-120μm, 53-150μm
Boling point N/A
Specific Heat N/A
Thermal Conductivity 9.8 W/m·°C (21 °C)
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass N/A
Monoisotopic Mass N/A
   
   

Inconel Alloy In625 Powder Health & Safety Information

Safety Warning Danger
Hazard Statements H317-H351-H372
Flashing point N/A
Hazard Codes Xn
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information NONH for all modes of transport
WGK Germany

N/A


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

3D printing technology emerged in the mid-1990s and is actually the latest rapid prototyping device utilizing technologies such as light curing and paper lamination. It is basically the same as ordinary printing. The printer is equipped with "printing materials" such as liquid or powder. After connecting to the computer, the "printing materials" are superimposed layer by layer through computer control, and finally the blueprint on the computer is turned into a real thing. This printing technology is called 3D stereo printing technology.
Our company is a strong company that provides excellent 3D printing Inconel 625 Powder. If you need 3D printing and Inconel 625 Powder, please feel free to contact us.

Inquery us

Our Latest Products

High Purity Iron powder Fe Powder CAS 7439-89-6, 99%

Sweden is in talks with Turkey on joining NATO and looks forward to strengthening cooperation with Turkey in security and counter-terrorism, Swedish Prime Minister Anders Andersson said recently. Andersson held a joint press conference with visiting…

High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

A tanker carrying 650,000 barrels of Venezuelan crude oil is reportedly bound for Europe, the first time Venezuela has exported crude to Europe in the past two years under US sanctions. It is analyzed that the U.S. is making up for the European ener…

High Purity Spherical Graphite C Powder CAS 7782-42-5, 99.9%

About Spherical Graphite Powder:Spherical graphite (SPG), also known as battery-grade graphite, is a product consumed as an anode in lithium-ion batteries. The flake graphite concentrate is processed into ultra-high purity (>99.95%C) with a particle…