Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for TiN Powder.
About Titanium Nitride TiN Powder:
Titanium Nitride (TiN) is a very hard ceramic material, usually used as a coating for titanium alloys, steel, carbides and aluminum components to improve the surface properties of the substrate. The Vickers hardness of TiN is 1800-2100, the elastic modulus is 251 GPa, the coefficient of thermal expansion is 9.35×10-6 K-1, and the superconducting transition temperature is 5.6K.
TiN will oxidize at 800°C at normal temperature. TiN is brown and appears golden when it is coated. According to laboratory tests, it is chemically stable at a temperature of 20°C but will be slowly corroded by concentrated acid solutions at high temperatures. Depending on the material and surface finish of the substrate, the friction coefficient between TiN and another TiN is 0.4 to 0.9 TiN surface (unlubricated). The typical TiN formation has a NaCl-type crystal structure with a stoichiometric ratio of about 1:1. However, TiNx compounds with x in the range of 0.6 to 1.2 are thermodynamically stable.
TiN becomes superconducting at low temperatures, and for single crystals, the critical temperature is as high as 6.0K. The superconductivity in thin-film TiN has been extensively studied, and its superconductivity varies greatly depending on the sample preparation until the superconductivity in the superconductor-insulator transition is completely suppressed. Cooling the TiN film to an absolute value close to zero, converting it into the first known super insulator, suddenly increased the resistance by 100,000 times.
Titanium nitride is a hard ceramic material used as a coating on titanium alloys, steel, carbides and aluminum parts. Because of its golden surface, it can be used for jewelry and high-performance ceramic materials, as well as medical equipment such as scalpels and plastic bone, saw blades. In addition, it is also used as a conductive barrier in microelectronics and electrodes in bioelectronic applications. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Nitride TiN Powder in bulk.
How is Titanium Nitride TiN Powder produced?
Titanium nitride can be made by directly reacting titanium and nitrogen at 1200°C. The coating can be formed by a vapor deposition method using a mixed gas of titanium tetrachloride, nitrogen, and hydrogen. Titanium dinitride is obtained by heating metallic titanium in nitrogen or ammonia at 900-1000°C. Titanium tetranitride is obtained by heating titanium tetrachloride in ammonia at 1000°C.
Product Performance of Titanium Nitride TiN powder:
Our Titanium Nitride, TiN powder (CAS 25583-20-4) has high purity, narrow size distribution, high temperature strength, high fracture strength, good chemical resistance, good thermal shock resistance, low density and high hardness.
Technical Parameter of Titanium Nitride TiN powder:
|Product Name||MF||Purity||Particle Size||Specific Surface Area
( m2/g )
( g/cm3 )
|Titanium Nitride||TiN||99%||1-3um, 5-10um||7.39||0.19||Spherical||Gray-black|
Chemical Composition of Titanium Nitride TiN powder:
Application of Titanium Nitride TiN powder:
Titanium nitride is a hard ceramic material used as a coating on titanium alloys, steel, carbides and aluminum parts. Because of its golden surface, it can be used for jewelry and high-performance ceramic materials, as well as medical equipment such as scalpels and orthopedic bone saw blades. In addition, it is also used as a conductive barrier in microelectronics and electrodes in bioelectronic applications.
TiN is used as a thin coating to harden and protect cutting and sliding surfaces, for decorative purposes (due to its golden appearance), and as a non-toxic exterior for medical implants. In most applications, the applied coating thickness is less than 5 microns (0.00020 inches).
TiN is usually applied to steel, hardened steel and stainless steel materials that require high wear resistance and lubricity. TiN is an essential material for physical vapor deposition coatings and is very suitable for applications that use expensive tools (such as injection molding, sawing, tapping, and molding).
The coating is also used in many medical (implants, surgical instruments, etc.) and food processing applications. TiN can be easily peeled off and can be recoated. Can be stripped and recoated.
Make plastic packaging materials, such as PET bottles.
In the solar vacuum tube, the absorbed sunlight is very large.
The high-temperature furnace is used for energy consumption.
Making artificial limbs, biological materials.
Manufacturing optical equipment in harsh environments.
Used as alloy modifier in cemented carbide.
Packing & Shipping of Titanium Nitride TiN Powder :
We have many different kinds of packing which depends on the titanium nitride TiN powder quantity.
Titanium nitride TiN powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium nitride TiN powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality TiN powder, please feel free to contact us and send an inquiry. ([email protected])
Titanium Nitride Properties
|Other Names||Tinite, TiNite, TiN powder, nitridotitanium|
|Solubility in H2O||N/A|
Titanium Nitride Health & Safety Information
The technology and telecommunications industry is advancing at a rapid pace in a process of constant innovation and excitement. Tech devices and infrastructure are becoming smarter and more connected, powered by emerging technologies such as 5G and artificial intelligence (AI) for the Internet of Things. Advances in IT service delivery, particularly the adoption of cloud computing and edge computing technologies, are supporting digital transformation in businesses and the wider economy.
Product name are widely used in technical equipment, the market demand for TiN Powder continues to expand, and a series of processes such as the management and sales of TiN Powder will continue to improve and develop. If you need a TiN Powder, please contact us.
Recently, some countries are short of electricity, or seek energy solutions, will this affect the bhutan honeymoon places ?…
The world's coal bosses and oil barons are among the biggest winners in 2022, as the fortunes of many tech giants have tumbled in the U.S. stock market. India's most powerful coal boss, Gautam Adani, has a net worth of $146.8 billion, pushing him pas…