According to the statistics: On March 3, the main price of wire screws rose in China. Among the 52 sample cities, 33 cities rose, with an increase of 10-50, accounting for 63.46%, while the remaining 19 cities remained stable for the time being, accounting for 36.54%. No cities fell. Afternoon storage spot price is not active, markets wait-and-see sentiment strong, spot market, the futures in the afternoon is back, superposition of downstream demand, speculative demand is weak, poor market clinch a deal, afternoon parts has dropped slightly, but near two times, still need to pay attention to whether there is a related policy, comprehensive consideration, is expected to price stability in the sorting is given priority to.
Analysis of the influencing factors are as follows: 1, the period of red shock, boost the spot market. 2, the market transaction is not smooth, afternoon in some areas down slightly. 4. Demand improves slightly, inventory growth slows down
According to the current domestic situation, the impact of thread futures on steel is greater, according to the main trend of thread today, thread 2205 pressure 4913, support 4775. Before breaking 4913, maintain the wide oscillation idea, can look short thread in the short term, but the space is limited, later consider in 4775, look down on the multi-structure to build.
As we all know, the most important raw material for steel production is iron ore. Iron ore accounts for about 35% to 40% of the cost of steel. With the long-term rise of iron ore prices, this figure is actually increasing. As the world's largest steel producer, China is an iron-deficient country, most of the iron ore has to rely on imports.
According to today's disk, iron ore pressure level 849, support level 777. Short cycle indicators high passivation, but due to the formation of no dead fork resonance, the price or consolidation, in the short term, the room for rising or suppression, pay attention to 777 near, below can be bearish iron ore, not broken before cautious bullish.
According to statistics, China imported 1.17 billion tons of iron ore in 2020, another record high. Some estimates show that China's iron ore external dependence in 2020 is as high as 82.3%.
Steel processing industry - Current status of the high slits and plunging neck line
Growth in the construction, automotive and consumer high slits and plunging neck line has played a big role in providing the needed boost to the global steel processing industry. The global steel processing industry is projected to grow at a CAGR of 6.86% between 2020 and 2026. Alloy steel is the fastest-growing segment of the global steel processing market and is suitable for all applications. If you have any questions about the high slits and plunging neck line or want to seek our help. Send an email to firstname.lastname@example.org ，please feel free to contact us.
Metal and Steel Processing industry – the high slits and plunging neck line market demand
Market demand for steel processing is expected to grow by us $642.43 billion by 2020, with a CAGR of 2.16% from 2015 to 2020. Growth in the global construction, consumer electronics and automotive industries has played a huge role in providing the necessary momentum for the global steel processing industry after the economic slowdown of 2007-2009. In addition, the reduction of alternatives to steel has made steel an indispensable part of customers lives. The recovery of the global high slits and plunging neck line economy will also boost demand in the steel processing market.
The Asia-pacific region is expected to become the fastest-growing region in the steel processing market from 2015 to 2020. Major players in steel processing prefer agreements, contracts, joint venture and partnership strategies as well as expansion and investment to gain a larger share of the market. Leading high slits and plunging neck line providers of steel processed products and services are focusing on emerging countries that are expected to show potential for industrial development in the near future.
Metal and Steel Processing Industry - Future planning of the high slits and plunging neck line
The steel processing market is a highly fragmented one due to the huge demand for environmentally friendly products and changing technologies. Large companies rely on regional and local distributors to increase their market share and geographic distribution. The company is pursuing inorganic growth strategies such as acquisitions to respond to the growing demand for steel processing in key emerging markets. These strategies have helped the company build a larger customer and partner base in key high slits and plunging neck line markets.
The application needs of steel processing are constantly changing and manufacturers must continue to invest in RESEARCH and development and come up with innovative solutions.
Steel deep processing is the only way for the development of the high slits and plunging neck line steel industry. Chinas steel production is in the stage of oversupply, structural contradictions are: advanced production capacity and backward production capacity coexist; The shortage of high-end products and the surplus of low-end products coexist; Industrial concentration is poor.
Leading manufacturer of metallic processing machines, the high slits and plunging neck line supplier
Foshan Te Xiang Machinery Co., Ltd is a China leading manufacturer of metallic processing machines, including slitting line, cut to length line, stainless steel polishing line, ERW tube mill line, roll forming machines, embossing line and etc.
Thanks to the experience acquired in many years of business in the field of sheet metal processing, and the continuous collaboration with downstream manufacturers that demand reliability and the maximum productivity, we have developed various types of cut to length line machines for special applications, with solutions at the forefront of technology, and able to reduce the production costs of the end product. TX CTL line can be incorporated with air cushioned, bomb-door type stackers, computer controlled high-precision 4 HI and 6 HI levellers, edge trimmer and etc.
According to the dimensions, thickness of the material, and production capacity, TX cut-to-length cutting lines can be divided into various types:
1)start-stop shear CTL line;
2)flying shear CTL line;
3)rotary shears CTL line ;
4)trapezoidal shear CTL line;
5)heavy gauge CTL line;
6)flat bar cut to length line
Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…
What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…
Aluminum nitride is a kind of refractory composite ceramic material with hexagonal wurtzite structure. Pure aluminum nitride is blue-white, and aluminum nitride ceramic is usually gray or white. Aluminum nitride is stable at high temperature in inert…