What are Common Metal Alloys?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The price of nickel and stainless steel rose together. Nickel afternoon hand in hand with stainless steel together turn red up. Due to the temporary easing of geopolitical risks, risk assets are now picking up, nonferrous metals, stock markets, and so on have risen, the overall mood has temporarily improved. Ore prices are strong, the overlay of the epidemic on spot logistics or the formation of a certain impact. Phase, nickel and stainless steel materials to maintain high wide concussion pattern.

Nickel prices based on low inventory, tight supply and demand will still show high wide fluctuations. In addition, the current LME has low liquidity, so its sensitivity to capital will remain relatively high. Shanghai nickel-wide fluctuations are expected to continue in the 200,000-250,000 yuan wide repeated fluctuation trend. While stainless steel is affected by the stronger nickel pig iron, the cost support continues, but note that under the current demand is not effectively released, the upward space may also be affected, the stage is expected to fluctuate between 20000 and 22,000 yuan. The price of nickel produced such fluctuations, indicating that the price of the metal alloy may also be affected to a certain extent.

What are Alloys?

An alloy is a mixture of chemical elements, at least one of which is metal. Unlike compounds with metal bases, alloys will retain all of the properties of metals in the resulting material, such as conductivity, ductility, opacity, and gloss, but may have different properties from pure metals, such as increased strength or hardness. In some cases, alloys can reduce the overall cost of the material while retaining important properties. In other cases, mixtures confer synergistic properties on the constituent metal elements, such as corrosion resistance or mechanical strength. 

An alloy is defined by its metal-binding properties. Alloy composition is usually measured by mass percentage in practical applications and atomic fraction in basic scientific research.  Alloys are usually classified as substitute alloys or interstitial alloys according to the arrangement of atoms forming them. They may be further classified as homogeneous (consisting of a single-phase), heterogeneous (consisting of two or multiple phases), or intermetallic compounds. An alloy may be a solid solution of a metallic element (a single phase in which all metallic grains (crystals) have the same composition) or a mixture of metallic phases (two or more solutions that form different crystalline microstructures within the metal). 

Examples of alloys include red gold (gold and copper) platinum (gold and silver), pure silver (silver and copper), steel or silicon (iron and non-metallic carbon or silicon respectively), solders, brass, tin, duralumin, bronze, and amalgam. 

Alloys can be used in a wide range of applications, from steel alloys (used in everything from construction to automobiles to surgical tools) to special titanium alloys for the aerospace industry to beryllium copper alloys for sparkless tools.

What are the Five Metal Alloys?

1.    Steel alloy

Alloy steels include nickel steel, chromium steel, manganese steel, tungsten steel, vanadium steel, and molybdenum steel. Nickel-steel alloy has better elasticity, less brittleness, and higher tensile strength. It also has greater ductility and hardness. It is used to make machine parts, shafts, boilerplates, etc. Steels containing 30% nickel are called invar alloys, which have a low coefficient of thermal expansion.

Chromium steel has greater ultimate strength. It is used for ball bearings, crushers, permanent magnets, shavers, rolling mill rolls, tableware, and so on. It contains between 1% and 2.5% chromium. If the percentage of chromium is high (12%), this alloy is called stainless steel, which is acid resistant, stain and rust-resistant, and can be used in surgical instruments, utensils, decorative accessories, etc. 

Manganese steel contains 2% manganese and is hard and strong. It has high resistance, non-magnetic properties, and a low thermal expansion coefficient. Used for heavy earthmoving equipment, crusher jaw plate, railway track, etc.

Tungsten steel contains 5 to 7 percent tungsten. This is used for lathe tools, drills, chisels, cutters, reamers, etc. 

Vanadium steel has high tensile strength and yield strength. Used for high-speed tools, locomotive castings, engine frame, chassis, crankshaft, axle, spring, etc. 

Molybdenum steel contains 0.2% to 0.3% molybdenum (two other metals, chromium, and manganese, are usually used with molybdenum). It also has a high tensile strength at high temperatures. Used for shafts, gears, axles, automobile, and aircraft parts.

2.    Copper alloy: 

Brass and bronze are important alloys of copper. Brass is an alloy of copper and zinc (70% to 85% copper). It is very resistant to corrosion and can be rolled into sheets, turned into tubes, drawn into wires, and cast into the desired shape. 

Add some nickel to the brass to make German silver or nickel silver. 

Bronze is an alloy consisting mainly of copper and tin. Gunmetal, bell metal, and phosphor bronze are various types of bronze. Gun metal contains copper, tin, and zinc. Bell metals contain copper and tin. Phosphor bronze contains copper, tin, and phosphorus.  Manganese bronze contains copper, manganese, aluminum, lead, iron, and zinc, and speculum metal contains copper and zinc. 

Different types of bronze have different uses. They are used in the manufacture of guns, bearings, clocks, underwater structures, axles, and axles. 

3.    Aluminum alloy: 

Aluminum can be alloyed with copper, silicon, magnesium, manganese, nickel, and iron. 

4.  Nickel alloy: 

Monel metal and nickel silver are two nickel alloys. Monel metal contains copper and small amounts of nickel and other metals. Nickel silver or German silver contains copper (50 to 80 percent), zinc (10 to 35 percent), and nickel (5 to 30 percent). It is very white and has good corrosion resistance. Used to make scientific instruments and utensils. 

5.  Magnesium alloy: 

The metallic and electronic metals are magnesium alloys. Dow contains magnesium (87 percent to 97 percent) aluminum (4 percent to 12 percent) and manganese (0.1 percent to 0.4 percent). Electronic metals contain magnesium (95% to 96%), zinc (4%), and small amounts of iron, copper, and silicon. These alloys are very light. They are easy to operate.  They are used to make aircraft parts, furniture frames, and so on.

Metal Alloy Price

The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.

If you are looking for the latest metal alloy price, you can send us your inquiry for a quote. (sales1@rboschco.com)

Metal Alloy Supplier

RBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials. The company export to many countries including the USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Azerbaijan, Belgium, Cyprus, Czech Republic, Brazil, Chile, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, Germany, France, Italy, Portugal, etc.

As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges.

If you are looking for metal alloy, please send an email. (sales1@rboschco.com)

The COVID-19 pandemic has affected economies and chemical companies in many countries around the world. Measures such as extending holidays and resuming work were taken to control the development of the epidemic, and the normal operation of some chemical enterprises was also affected to some extent.

We provides high quality metal alloy with reasonable price. “In order to feedback to old customers, the company is still in full operations to provide metal alloy with competitive price.” said Olina, the sales manager.

Chemical metal alloy, feel free to contact us.

Inquiry us