High Purity BAM Aluminum Magnesium Boride AlMgB14 Powder

Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises.  

Spot aluminium trading on the market has been suspended in recent weeks, according to industry sources, as uncertainty has increased following the outbreak of the conflict between Russia and Ukraine.  Even before the war, the aluminium market was suffering from long waiting times and weak demand.  

For aluminium buyers, recent poor US economic data have been a big factor in delaying purchases.  Data released last month showed that the ISM manufacturing PMI came in at 57.1 in March, below expectations of 59 and down from 58.6 in February, unexpectedly hitting the lowest reading since September 2020.  This was mainly due to a slowdown in new orders and BAM powder are expected to increase in the future.

About AlMgB14 alloy powder:
Aluminum boride or Al3Mg3B56, commonly known as BAM, is a compound of aluminum, magnesium, and boron. Although its nominal formula is AlMgB14, its chemical composition is closer to Al0.75Mg0.75B14. It is a highly wear-resistant ceramic alloy with an extremely low sliding friction coefficient, reaching a record value of 0.04 in the unlubricated AlMgB14-TiB2 composite material, and a record value of 0.02 in the lubricated AlMgB14-TiB2 composite material. BAM was first reported in 1970. It has an orthogonal structure and each unit cell has four icosahedral B12 units. The thermal expansion coefficient of this super hard material is comparable to other widely used materials such as steel and concrete. TRUNNANO is a trusted global Aluminum-Magnesium Boride BAM AlMgB14 Powder supplier. Feel free to send an inquiry about the latest price of AlMgB14 at any time.
 
How is AlMgB14 alloy Powder Produced?
AlMgB14 aluminum magnesium boride material has a better anti-wear property than diamond and is a new type of anti-degradation material. AlMgB14 has a density of only 2.66 g/cm3, which is much lower than other superhard materials (such as diamond and cubic boron nitride), and does not react with carbon steel, stainless steel, or titanium alloy at temperatures up to 1300 °C, and has high thermal stability.
AlMgB14 aluminum magnesium boride has a much higher conductivity than other conventional super hard materials and is basically equivalent to the conductivity of poly-silicon. The most attractive aspect of AlMgB14 is its low price, which is 5 to 10 times lower than diamond and cubic boron nitride. These excellent properties make AlMgB14 not only wearable,
Traditional fields such as protective coatings and cutting equipment manufacturing can also be widely used in advanced scientific fields such as thermoelectric devices, photodetectors, neutron masks, micro machines, and aerospace key components.
 
Applications of AlMgB14 alloy Powder:
BAM is commercially available, and research is being conducted for more potential applications. For example, the pistons, seals, and vanes on the pump can be coated with BAM or BAM + TiB2 to reduce friction between parts and increase wear resistance. The reduction in friction will reduce energy consumption. BAM can also be coated on cutting tools. The reduced friction will reduce the force required to cut the object, extend tool life, and may allow an increase in cutting speed. It has been found that only 2-3 microns thick coating can increase efficiency and reduce cutting tool wear.
Ternary Boride AlMgB14 alloy powder is one of the research hotspots in the field of superhard materials in the world. It has attracted widespread attention from scholars at home and abroad in recent years. Unlike traditional metastable superhard materials such as diamond and cubic boron nitride, AlMgB14 superhard materials are equilibrium materials with high hardness, low density, low coefficient of friction, high thermal stability, and good thermoelectric properties.

Properties and application of AlMgB14 alloy powder:
AlMgB14 aluminum magnesium boride material has a better anti-wear property than diamond and is a new type of anti-degradation material. AlMgB14 has a density of only 2.66 g/cm3, which is much lower than other superhard materials (such as diamond and cubic boron nitride), and does not react with carbon steel, stainless steel, or titanium alloy at temperatures up to 1300 °C, and has high thermal stability.
AlMgB14 aluminum magnesium boride has a much higher conductivity than other conventional superhard materials and is basically equivalent to the conductivity of polysilicon. The most attractive aspect of AlMgB14 is its low price, which is 5 to 10 times lower than diamond and cubic boron nitride. These excellent properties make AlMgB14 not only wearable,
Traditional fields such as protective coatings and cutting equipment manufacturing can also be widely used in advanced scientific fields such as thermoelectric devices, photodetectors, neutron masks, micromachines, and aerospace key components. 

Storage Condition of AlMgB14 Aluminum Magnesium Boride Powder:
The damp reunion will affect AlMgB14 aluminum magnesium boride dispersion performance and using effects, therefore, AlMgB14 aluminum magnesium boride powder should be sealed in vacuum packing and stored in the cool and dry room, the AlMgB14 aluminum magnesium boride can not be exposure to air. In addition, the AlMgB14 powder should be avoided under stress.

Packing & Shipping of AlMgB14 Aluminum Magnesium Boride Powder:
We have many different kinds of packing which depend on the AlMgB14 aluminum magnesium boride powder quantity.
AlMgB14 aluminum magnesium boride powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
AlMgB14 aluminum magnesium boride powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality BAM AlMgB14 powder, please feel free to contact us and send an inquiry. ([email protected])
 

For Germany, the largest economy in Europe, the impact of the Russian-Ukrainian conflict on the natural gas market is the most obvious. This also exposed the serious dependence of some German industrial enterprises on Russian natural gas. Some analysts pointed out that the instability of natural gas supply has had a big impact on the German economy and threatened its market competitiveness because alternative energy supplies will not be cheap and difficult to come quickly. Increased uncertainty over natural gas supplies is putting enormous pressure on German manufacturers in sectors ranging from steelmaking to chemical BAM powder for the time being, but the market demand for BAM powder in the future will also change with the influence of various external factors. If you need BAM powder, please feel free to contact us.

Inquiry us