• 0
  • 0

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Recently, covid 19 outbreak spreads in Shanghai, China. There are more than 25,000 new asymptomatic domestic infections every day. China is implementing a dynamic zero-out policy. A leading respiratory expert said the key to COVID-19 prevention and control is to minimize transmission and fatality rate. Omicron has a low case fatality rate but is highly transmissible and can still claim many lives in large outbreaks. "Total openness is not applicable in China.  For China, we should keep to the dynamic zero-out and gradually open up."  

However, "dynamic zero clearance" is not the pursuit of complete "zero infection".  As the Novel Coronavirus has its own uniqueness and strong concealment, there may be no way to prevent the detection of cases at present, but rapid detection and prompt treatment must be carried out, as soon as one case is found, one case will be dealt with.  

The situation in Shanghai is serious. As the financial center of China, Shanghai is a very important city, and the outbreak of the epidemic in Shanghai will put a great impact on China's economy.  The current task is to contain the spread of the epidemic as soon as possible, to achieve social zero so that Shanghai's life and economy quickly return to normal.  

As China plays an important role in the global supply chain, the outbreak will have a significant impact on the supply and prices of many TiN Powder.

 About Titanium Nitride TiN Powder: 
Titanium Nitride (TiN) is a very hard ceramic material, usually used as a coating for titanium alloys, steel, carbides and aluminum components to improve the surface properties of the substrate. The Vickers hardness of TiN is 1800-2100, the elastic modulus is 251 GPa, the coefficient of thermal expansion is 9.35×10-6 K-1, and the superconducting transition temperature is 5.6K.
TiN will oxidize at 800°C at normal temperature. TiN is brown and appears golden when it is coated. According to laboratory tests, it is chemically stable at a temperature of 20°C but will be slowly corroded by concentrated acid solutions at high temperatures. Depending on the material and surface finish of the substrate, the friction coefficient between TiN and another TiN is 0.4 to 0.9 TiN surface (unlubricated). The typical TiN formation has a NaCl-type crystal structure with a stoichiometric ratio of about 1:1. However, TiNx compounds with x in the range of 0.6 to 1.2 are thermodynamically stable.
TiN becomes superconducting at low temperatures, and for single crystals, the critical temperature is as high as 6.0K. The superconductivity in thin-film TiN has been extensively studied, and its superconductivity varies greatly depending on the sample preparation until the superconductivity in the superconductor-insulator transition is completely suppressed. Cooling the TiN film to an absolute value close to zero, converting it into the first known super insulator, suddenly increased the resistance by 100,000 times.
Titanium nitride is a hard ceramic material used as a coating on titanium alloys, steel, carbides and aluminum parts. Because of its golden surface, it can be used for jewelry and high-performance ceramic materials, as well as medical equipment such as scalpels and plastic bone, saw blades. In addition, it is also used as a conductive barrier in microelectronics and electrodes in bioelectronic applications. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Nitride TiN Powder in bulk.

 How is Titanium Nitride TiN Powder produced? 
Titanium nitride can be made by directly reacting titanium and nitrogen at 1200°C. The coating can be formed by a vapor deposition method using a mixed gas of titanium tetrachloride, nitrogen, and hydrogen. Titanium dinitride is obtained by heating metallic titanium in nitrogen or ammonia at 900-1000°C. Titanium tetranitride is obtained by heating titanium tetrachloride in ammonia at 1000°C.

Product Performance of Titanium Nitride TiN powder:
Our Titanium Nitride, TiN powder (CAS 25583-20-4) has high purity, narrow size distribution, high temperature strength, high fracture strength, good chemical resistance, good thermal shock resistance, low density and high hardness.

Technical Parameter of Titanium Nitride TiN powder:

Product Name MF Purity Particle Size Specific Surface Area
( m2/g )
Volume Density
( g/cm3 )
Crystal Form Color
Titanium Nitride TiN 99% 1-3um, 5-10um 7.39  0.19 Spherical Gray-black

Chemical Composition of Titanium Nitride TiN powder:

TiN N O C Fe Al Ca Si Ni
99.5% 21.5% 0.6-1.2% 0.1% 0.015% 0.01% 0.01% 0.30% 0.3%

Application of Titanium Nitride TiN powder:
Titanium nitride is a hard ceramic material used as a coating on titanium alloys, steel, carbides and aluminum parts. Because of its golden surface, it can be used for jewelry and high-performance ceramic materials, as well as medical equipment such as scalpels and orthopedic bone saw blades. In addition, it is also used as a conductive barrier in microelectronics and electrodes in bioelectronic applications.
TiN is used as a thin coating to harden and protect cutting and sliding surfaces, for decorative purposes (due to its golden appearance), and as a non-toxic exterior for medical implants. In most applications, the applied coating thickness is less than 5 microns (0.00020 inches).
TiN is usually applied to steel, hardened steel and stainless steel materials that require high wear resistance and lubricity. TiN is an essential material for physical vapor deposition coatings and is very suitable for applications that use expensive tools (such as injection molding, sawing, tapping, and molding).
The coating is also used in many medical (implants, surgical instruments, etc.) and food processing applications. TiN can be easily peeled off and can be recoated. Can be stripped and recoated.
Make plastic packaging materials, such as PET bottles.
In the solar vacuum tube, the absorbed sunlight is very large.
The high-temperature furnace is used for energy consumption.
Making artificial limbs, biological materials.
Manufacturing optical equipment in harsh environments.
Used as alloy modifier in cemented carbide.

Packing & Shipping of Titanium Nitride TiN Powder :
We have many different kinds of packing which depends on the titanium nitride TiN powder quantity.
Titanium nitride TiN powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium nitride TiN powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality TiN powder, please feel free to contact us and send an inquiry. ([email protected])


Titanium Nitride Properties

Other Names Tinite, TiNite, TiN powder, nitridotitanium
CAS No. 25583-20-4
Compound Formula TiN
Molecular Weight 61.87
Appearance Brown Powder
Melting Point N/A
Boiling Point N/A
Density 5.24 g/cm3
Solubility in H2O N/A
Exact Mass 61.951

Titanium Nitride Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

With the outbreak of the Russia-Ukraine conflict, the market is increasingly worried about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the TiN Powder may continue to rise.

Inquery us

Our Latest Answers

Is boron amorphous or crystalline?

Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…

What does copper oxide do?

What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…

Where can you get aluminum nitride?

Aluminum nitride is a kind of refractory composite ceramic material with hexagonal wurtzite structure. Pure aluminum nitride is blue-white, and aluminum nitride ceramic is usually gray or white. Aluminum nitride is stable at high temperature in inert…