Answers

  • 0
  • 0

Properties and Applications of Ti6Al4V TC4 Powder

The roble had hit a record low after the West imposed sweeping sanctions on Russia for its aggression in Ukraine. Russia's president recently ordered exports of Russian gas to "unfriendly" countries to be settled in robles. The speaker of Russia's upper house of parliament said Moscow was prepared and could shift supplies to markets such as Asia if Europe refused to buy Russian energy.

European countries, which pay mostly in euros, say Russia has no right to reset contracts.  The G7 rejected Russia's demand and urged companies not to agree to pay in robles, saying most contracts stipulated payment in euros or dollars. Wholesale gas prices in Europe have risen further recently on concerns about potential supply disruptions.

The Kremlin spokesman said, "According to the March 31 deadline set by Russia's president, we are developing all payment methods to get a simple, understandable, and feasible system for relevant European and international buyers,"

The markets and prices of more commodities like the TC4 would be affected because of the volatile international political situations.

Introduction to Ti6Al4V Powder TC4 Powder
TC4 titanium alloy material, also known as Ti-6Al-4V titanium alloy, belongs to the (α+β) type titanium alloy. It has good comprehensive mechanical properties, good stability of the structure, good toughness, plasticity, and high-temperature deformation performance. It can be better for hot pressure processing, quenching, and aging to strengthen the alloy.  The strength after heat treatment is about 50%~100% higher than that after annealing. It has high strength at high temperatures and can work at 400~500 temperature for a long time.
TC4 also has good low-temperature performance. It still has good toughness below -196and, therefore, is used to manufacture low-temperature high-pressure vessels, such as liquid hydrogen fuel tanks for rockets and missiles.
 

Physicochemical Properties of Ti6Al4V Powder TC4 Powder
TC4 titanium alloy material is characterized by lightweight, excellent mechanical properties, corrosion resistance, and biocompatibility. In addition, it has low thermal conductivity and is non-magnetic.
Titanium-based metal, as a new type of metal, its properties depend on other elements like carbon, nitrogen, hydrogen, oxygen, etc. In general, it has:
1, high strength. Titanium typically has a density of 4.51 grams per cubic centimeter, only 60 percent of that of steel. The density of pure titanium is similar to that of ordinary steel, and the strength of some high-strength titanium alloys is higher than that of many alloy structural steel. Therefore, the specific strength (strength/density) of titanium alloy is much higher than that of other metallic structural materials. 
2, high thermal strength. At medium temperature, titanium alloy can still maintain the required strength and can work at 450~500 for a long time. 
3, good corrosion resistance. Titanium alloy works in a humid atmosphere and seawater medium, its corrosion resistance is far better than stainless steel pitting corrosion, acid corrosion, stress corrosion especially strong alkali, chloride, chlorine organic matter, nitric acid, sulfuric acid, and so on. 
4, good low-temperature performance. Titanium alloys can still maintain mechanical properties at low and ultra-low temperatures. TA7 is a titanium alloy with good low-temperature performance and very low gap elements, which can maintain certain plasticity at -253. Therefore, titanium alloy is also an important low-temperature structural material. 
5, high chemical activity. Titanium has high chemical activity and has a strong chemical reaction with oxygen, nitrogen, hydrogen, CO, CO2, water vapor, ammonia, and so on in the atmosphere. When the carbon content is greater than 0.2%, hard TiC is formed in titanium, and a hard TiN surface is formed at high temperatures. When the carbon content is above 600, titanium can absorb oxygen and form a hard hardening layer. At high temperatures, with the increase of hydrogen content, a hard hardening layer is formed.  After inhalation, the depth of the hard brittle surface can reach 0.1~0.15mm, and the hard brittle surface can reach 20%~30%. Its chemical affinity is also strong, and easy to adhere to the friction surface. 
6, small thermal conductivity elasticity. The thermal conductivity of the titanium system is about 1/4 of nickel, 1/5 of iron, 1/14 of aluminum, and the thermal conductivity of various titanium alloys is about 50%. The elastic modulus of titanium is about 1/2 that of steel, with poor stiffness and easy deformation. It is not suitable for slender rods and thin-walled parts. 
 

Ti6Al4V Powder TC4 Powder Properties
Other Names Ti6Al4V Powder, TC4 Powder
CAS No. N/A
Compound Formula TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,
Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb)
Molecular Weight N/A
Appearance grey powder
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass N/A

 

3D Printing Ti6Al4V Powder TC4 Powder
 

 
 

Applications of Ti6Al4V Powder TC4 Powder
Ti6Al4V is used in many high-performance engineering applications, such as aerospace, automotive, and medical device manufacturing. 
Aerospace: Components for jet engines 
Manufacturing: Industrial turbines 
Car: muffler 
Medical: implants, artificial bones 
In the petrochemical industry: In most inorganic salts, TC4 titanium rods are completely inert and have excellent corrosion resistance. For example, in the production of electrolytic Mn02, the electrolyte is a neutral MnSO4 solution, which requires the electrode to be resistant to sulfate corrosion. The effect of a telegraph machine made of lead alloy and graphite is not good. After switching to titanium, the anode is not corroded and becomes a semi-permanent device. 
TC4 titanium alloy rod has excellent corrosion resistance in almost all organic acids and organic media except formic acid and oxalic acid.  In addition to methanol, titanium also resists corrosion by organic alcohols, aldehydes, and ketones. 
For example, in the petrochemical industry, acetic acid is prepared from acetaldehyde.  Because acetic acid, acetaldehyde, chloride, and catalyst corrode the stainless steel equipment seriously, titanium material is used to solve the corrosion problem of equipment in acetic acid production. Acetone, for example, can be made from propylene, or titanium production facilities can be used. Japan built a plant with an annual output of 30,000 tons of acetone and used nearly 40 tons of titanium. 
Finally, TC4 titanium rods are resistant to wet H2S gas, wet SO4 gas, ammonia, and industrial atmospheres (titanium should be used with particular care in small hydrogen-containing media and pure oxygen). 
For example, in the oil refining industry, equipment is often corroded by H2S, NH8, sulfide, chloride, and titanium equipment can solve the corrosion problem. Titanium is mainly used in distillation towers, condensers, air coolers, and other equipment in petroleum refining.  Titanium is an ideal corrosion-resistant material in ammonia and urea production. 
 

Main Supplier of Ti6Al4V Powder TC4 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality Ti6Al4V Powder TC4 Powder, please feel free to contact us and send an inquiry. ([email protected])

 

With the outbreak of the Russia-Ukraine conflict, the market is increasingly worried about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the TC4 may continue to rise.

Inquery us

Our Latest Answers

Is boron amorphous or crystalline?

Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…

What does copper oxide do?

What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…

Where can you get aluminum nitride?

Aluminum nitride is a kind of refractory composite ceramic material with hexagonal wurtzite structure. Pure aluminum nitride is blue-white, and aluminum nitride ceramic is usually gray or white. Aluminum nitride is stable at high temperature in inert…