VX Direct Call Commands
ArrangeComps : --Arrange Components
AsActComp : --Activate a component for alignment
AsAlnDelAll : --Delete active component's alignment constraints
AsAlnLinLin : --Align component line with parent line.
AsAlnPlnAngPln : --Align component plane at angle to parent plane.
AsAlnPlnPln : --Align component plane opposite parent plane.
AsAlnPlnPlnS : --Align component plane with parent plane.
AsAlnPntPnt : --Align component point with parent point.
AsCompToSub : --Make component(s) local.
AsSubToComp : --Make component(s) external.
AsmAltComAct : --Activate an alternate component.
AsmAltComAdd : --Add an alternate component.
AsmAltComDel : --Delete an alternate component.
AsmAltComInq : --Show alternate component table.
AsmAltComList : --Representations
AsmBrowser : --Assembly Tree Browser
AsmComRepAct : --Activate a component configuration.
AsmComRepAdd : --Add name for component configuration.
AsmComRepAuto : --Create a configuration from the current part.
AsmComRepDel : --Delete name from component configuration table.
AsmComRepInq : --Show component configuration table.
AsmComRepList : --Configurations
AsmInqStat : --Inquire Component
AsmRepMngr : --Configurations
AsmTreeMngr : --Assembly Tree Browser
AsmTreeMngrIns : --Insert a component.
BatchTacForm : --Batch Tactic Manager
BoreShapeForm : --Bore Tool Shape
BrowseShapes : --Shape Browser
CboreShapeForm : --Counterbore Tool Shape
CdAIsectTog : --Set isect options on/off
CdAddGroup : --Add entities to a group
CdAddSymLib : --Add a list of objects to active symbol library.
CdAnalTtGeom : --Analyze topology.
CdAng1ln : --Angle between a direction and x-axis.
CdAng2ln : --Angle between two directions.
CdAng2pl : --Angle between two planes.
CdAng3pt : --Angle between three points.
CdAng4pt : --Angle between four points.
CdAngArc : --Angle subtended by an arc.
CdAngFace : --Angle by face dihedral.
CdAngPlnPln : --Measure angle between planes
CdAsmEdXplode : --Move entities along direction
CdAsmExplode : --Assembly Explode.
CdAsmViewSw : --Switch assembly view from |CdStrAsmExpTo|.
CdBinLock : --Lock target object file.
CdBinUnlock : --Unlock target object file.
CdBlankComp : --Blank a sub-part
CdBlankDwg : --Blank entities.
CdBlankPart : --Blank entities.
CdBlend2Crvs : --Place a blend curve between two boundary curves.
CdBndPart : --Edit Part Boundary List
CdC2Auto : --Automatically constrain the target sketch.
CdC2InqAsoc : --Inquire on associated constraint objects
CdC2InqAuto : --Inquire on auto constrain
CdC2InqGrp : --Inquire on constraint system groups
CdC2InqSolv : --Inquire on profile system solve
CdC2InqSys : --Inquire on profile system constraints
CdCGAtBndSet : --Save/update Ray Trace attribute bundle.
CdCgRender : --Render the active view.
CdChnAdd : --Tag the start of a curve or chain of curves.
CdChnAdd2d : --Tag the start of a curve or chain of curves.
CdChnDel : --Delete "starting point" tag.
CdChnDel2d : --Delete "starting point" tag.
CdCirCB : --Create circle from center point and boundary point.
CdCirCR : --Create a circle from its center point and radius.
CdClipCopy : --Copy to clipboard
CdClipCut : --Cut to clipboard
CdClipGroup : --Clip and make it a group
CdClipPaste : --Paste clipboard object to target
CdClipRecall : --Retrieved saved 2D clipboard.
CdClipSave : --Save the active 2D clipboard.
CdCnsAlnHor : --Constrain points horizontally (aligned in y).
CdCnsAlnVer : --Constrain points vertically (aligned in x).
CdCnsAsocCMenu : --Inquire Constraint
CdCnsAsocDMenu : --Inquire Dimension
CdCnsAsocGMenu : --Inquire Geometry
CdCnsCocir : --Constrain points to be on an arc
CdCnsColin : --Constrain points to be Colinear to a line.
CdCnsConc : --Constrain a point to the center of an arc or circle.
CdCnsEqlLen : --Constrain distances to be equal
CdCnsFixX : --Constrain a point to be fixed in x.
CdCnsFixXY : --Constrain a point to be fixed in x and/or y.
CdCnsFixY : --Constrain a point to be fixed in y.
CdCnsHor : --Constrain a line horizontal.
CdCnsIsect : --Constrain point at intersection of two curves
CdCnsOnCrv : --Constrain points to be on curve
CdCnsPara : --Constrain lines to be parallel.
CdCnsPerp : --Constrain lines to be perpendicular.
CdCnsSolveMenu : --Inquire Constraint Solve
CdCnsSym : --Constrain points symmetrical about a line.
CdCnsSysMenu : --Inquire Constraint System
CdCnsTang : --Constrain two curves to be tangent.
CdCnsVer : --Constrain a line vertical.
CdCompEdit : --Activate component for editing.
CdCompShowDim : --Show component dimensions.
CdConnect : --Create a connecting line.
CdContAdd : --Attach a continuity tag to an edge
CdContDel : --Delete continuity tag.
CdCopyAlgnFrm : --Copy entity by aligning frames
CdCopyDir : --Copy entities along direction
CdCopyPnt2Pnt : --Copy entity from point to point
CdCopySwp : --Copy entity along sweep path
CdCrArc2ptR : --Create arc from each ends and radius.
CdCrArc3pt : --Create arc from start, end and circumference points.
CdCrArcCSE : --Create arc from center, start, and end point.
CdCrArcCon : --Create concentric arc.
CdCrCir2ptR : --Create circle from its two boundary points and radius.
CdCrCir3Pt : --Create circle from its three boundary points.
CdCrCirCB : --Create circle from its center and boundary point.
CdCrCirCR : --Create circles from radius(diameter) and its center points.
CdCrCirCon : --Create concentric circle.
CdCrTrace : --Create profile by tracing curves.
CdCrvApp : --Create a curve aproximating to points.
CdCrvCpts : --Create a closed curve using control points.
CdCrvFit : --Create a curve fitting to points.
CdCrvIntp : --Create a closed curve through points.
CdCrvIso : --Curve along face isoline
CdCrvIsoParm : --Curve along face isoline at parameter value.
CdCrvOffset : --Create offset curve.
CdCrvOnSf : --Curve through points on face
CdCrvRefit2Tol : --Refit a curve to within a tolerance.
CdCrvRefitOnKnt : --Refit a curve on a given knot vector.
CdCrvSpiral : --Create spiral curve.
CdCv3Intp : --Create a cubic curve through points
CdCv3IntpClsd : --Specify continuity condition at end points
CdCvCombTeeth : --Draw curvature plot of a curve in comb-teeth style
CdCvConcat : --Concatenate a list of curves
CdCvCp : --Create a curve using control points.
CdCvCpDraw : --Draw control polygon of curve
CdCvDerivDraw : --Draw 1st/2nd derivatives of a curve.
CdCvEdg : --Create curve from edge.
CdCvExtnd : --Extend curve
CdCvInt : --Create a curve through points
CdCvProjDir : --Project curves onto a face.
CdCvProjNrm : --Project curves onto a face.
CdCvProjSrf : --Project curves onto a face.
CdCvSSi : --Create curves from face/faceset intersection.
CdCvSetTan : --Set tangent direction at a curve interpolation point.
CdCvSplitTrim : --Split/trim a curve.
CdCvTrm2Face : --Trim curves to face boundary.
CdCvsRefit2Tol : --Refit curves compatible to a tolerance.
CdDbgCvPrjPln : --Create curves by projecting on viewplane.
CdDbgDisp : --Set debug display level
CdDbgNrbRefit : --Refit N curves.
CdDelDangEdgs : --Check/delete dangling edges in a topology table.
CdDelTinyEdgs : --Check/delete tiny edges in a topology table.
CdDelTrace : --Delete trace profile.
CdDelVoidVtxs : --Check/delete void vertices in a topology table.
CdDelaunay : --Set Triangulation Method
CdDirFaceNorm : --Direction along face normal
CdDraftAngAdd : --Attach draft angle attribute to face.
CdDraftAngDel : --Delete draft angle attributes.
CdDspContErr : --Display continuity error along edge
CdDspG1Err : --Display tangent continuity error.
CdDspG1ErrScl : --Adjust the tangent error display or <Escape>
CdDstGmGm : --Measure distance between two curves.
CdDstGmPt : --Measure distance between curve and a point.
CdDstPntPln : --Measure distance between point and plane
CdDstPtGm : --Measure distance between a point and a geometric entity.
CdDtmOpt : --Initial datum configuration.
CdDtmShowDim : --Show datum dimensions
CdDwgConOn : --Turn "construction" geometry ON/OFF.
CdDwgDel : --Delete drawing sheet.
CdDwgLimOn : --Turn "construction limits" ON/OFF.
CdDwgLimSet : --Define and enable construction limits.
CdDwgNew : --Insert a drawing.
CdDxFtr : --Import geometry
CdDxFtr1 : --Import geometry
CdEchoMode : --Set echo mode
CdEdgeDispNorm : --Display edge normals.
CdEditAsm : --Create/activate a assembly.
CdEditDwg : --Create/activate a drawing.
CdEditPart : --Create/activate a |CdStrSubPart|.
CdEditProf : --Create/activate a sketch.
CdEditRtSheet : --Create/activate a sheet.
CdEditSheet : --Create/activate a sheet.
CdEditSketch : --Create/activate a sketch.
CdEditSubDwg : --Create/activate a sub-drawing.
CdEditSubPart : --Create/activate a |CdStrSubPart|.
CdEqnNew : --Insert equation-set.
CdExpCrv : --Use curve/edge length in expression.
CdExpDim : --Use dimension in expression.
CdExpldGroup : --Explode a group
CdFaceBndRplc : --Modify face trim boundary
CdFaceDegElev : --Increment the U or V degree of a surface.
CdFaceDelete : --Delete faces.
CdFaceDispUvs : --Display face uv curves.
CdFaceExplode : --Explode faces.
CdFaceExt : --Extend a face.
CdFaceInsKt : --Insert new U or V knot value in face.
CdFaceJoin : --Join faces.
CdFaceMerge : --Merge a list of faces
CdFaceSetDiv : --Divide face or faceset to edges or parting lines
CdFaceSetJoin : --Join faces or facesets
CdFaceTol : --Set chord-height tolerance for face tessellation.
CdFacesetDel : --Delete faces/facesets.
CdFacesetFlip : --Flip faces/facesets.
CdFacesetSew : --Sew facesets
CdFcLstExplode : --Explode faces.
CdFcMchTan : --Impose tangent continuity along common boundary of faces
CdFilCv : --Place a fillet between two boundary curves.
CdFilCv3 : --Place a fillet between two 3D curves.
CdFileAct : --Activate file.
CdFileNew : --Create a new object file.
CdFileOpen : --Open a file for editing.
CdFileSwap : --Swap active source and destination files.
CdFlatSrf : --Unfold a surface onto a plane.
CdFmEdgHeal : --Report on edge check/heal
CdFmFaceHeal : --Report on face check/heal
CdFmInqVolMp : --Inquire mass properties
CdFmTtChkHeal : --Report on part topology check/heal
CdFmVtxHeal : --Report on vertex check/heal
CdFreezeObj : --Freeze entities.
CdFtrDelSupp : --Delete all suppressed entities.
CdFtrMark : --Mark a set of features.
CdFtrMark : --Mark end of feature set.
CdFtrMarkDel : --Delete feature marker.
CdFtrMirror : --Mirror features.
CdFtrOrder : --Reorder features
CdFtrPart2pt : --Parting line between two points
CdFtrPartPlnX : --Parting line at intersection with plane.
CdFtrPartSfEdg : --Parting line from face edges.
CdFtrPartSilh : --Parting line by extraction direction (silhouette curves).
CdFtrPartSrf : --Create a parting face from parting curves.
CdFtrPtnCir : --Make a circular pattern of features
CdFtrPtnLin : --Make a linear pattern of features
CdFtrPtnPnt : --Pattern feature at specified locations.
CdFtrReplace : --Replace one feature with another.
CdFtrSection : --Create section feature.
CdFtrSetName : --Rename feature.
CdFtrSetTol : --Set feature tolerance.
CdFtrShowDim : --Show feature dimensions
CdFtrShowEnt : --Show entities associated with a feature.
CdFtrShowPrf : --Toggle visibility of feature sketchs
CdFtrShowSub : --Toggle visibility of feature components
CdFtrSupp : --Toggle suppression of entities
CdFtrUnSupp : --Unsuppress all suppressed entities.
CdG1MchUtrSrf : --Impose tangency at common boundary of untrimmed faces
CdGetCompFile : --Get name of parent file for component.
CdGetCompName : --Name an instance.
CdGetCurve : --Bounding curve
CdGetDimTxt : --Dimension Text
CdGetFace : --Bounding face
CdGetTxtPnt : --Text Location
CdHealTtEdge : --Check/heal edges in a topology table.
CdHealTtFace : --Check/heal face boundaries in a topology table.
CdHealTtGeom : --Heal part topology.
CdHealTtPEdg : --Check/heal pre-edges in a topology table.
CdHealTtVtx : --Check/heal vertices in a topology table.
CdHistCopy : --Copy features to clipboard
CdHistCut : --Cut features to clipboard
CdHistDel : --Delete feature from history.
CdHistExtract : --Extract features to part.
CdHistPaste : --Paste clipboard features
CdHistRecall : --Retrieved saved 3D clipboard.
CdHistSave : --Save the active 3D feature clipboard.
CdHtAtBndSet : --Save hatch attribute bundle.
CdHtAtEntGet : --Get hatch attributes from entity.
CdHtAtEntSet : --Set hatch attributes to entity.
CdIferChk : --Perform interference check.
CdIgesIn : --Read an iges file.
CdInqEdgeLbl : --Query edge persistent label.
CdInqEntity : --Show entity information.
CdInqEntity : --Show entity information.
CdInqEntity : --Show entity information.
CdInqEntity : --Show target object information.
CdInqFaceLbl : --Query face persistent label.
CdInqIdx : --Query entity index.
CdInqLbl : --Show persistent label.
CdInqPartList : --Show part list
CdInqPartStat : --Show part statistics
CdInqTt : --Output the active b-rep's topology table.
CdInqVolMp : --Evaluate mass properties
CdInsSketch : --Insert a copy of a sketch
CdInsSymbol : --Insert a symbol.
CdInsideAdd : --Indicate "interior" of open profile.
CdInsideDel : --Delete "inside" tag.
CdInstPart : --Insert a component.
CdIsophMode : --Toggle face isophote display on/off.
CdLiteAmb : --Ambient light source.
CdLiteDel : --Delete light sources.
CdLiteDelAll : --Delete all light sources.
CdLiteDir : --Directional light source.
CdLiteEye : --"Eye" light source.
CdLiteMod : --Modify light source.
CdLitePnt : --Point light source.
CdLiteSpot : --Spot light source.
CdLn2Pts : --Create a line from two points.
CdLnAng : --Line at an angle through point.
CdLnAtBndDel : --Delete line attribute bundle.
CdLnAtBndSet : --Save/update line attribute bundle.
CdLnAtDwgGet : --Get entity line display attributes.
CdLnAtDwgSet : --Set entity line display attributes.
CdLnAtPartGet : --Get entity line display attributes.
CdLnAtPartSet : --Set entity line display attributes.
CdLnDir : --Line along direction, through point.
CdLnMult : --Create connected line segments.
CdLnOnSf : --Line on face
CdLnParDist : --Line parallel to reference line at distance.
CdLnPerp : --Line perpendicular to reference line.
CdLyrAct : --Set active layer.
CdLyrAdd : --Create a new layer.
CdLyrAssign : --Assign entities to a layer.
CdLyrAtAct : --Activate layer attributes
CdLyrAtClear : --Clear layer attributes
CdLyrAtSet : --Set layer attributes
CdLyrDel : --Delete empty layer.
CdLyrRename : --Rename a layer
CdMatAt : --Delete material attribute bundle.
CdMatAt : --Get shape's material attributes.
CdMatAt : --Save/update material attribute bundle.
CdMatAt : --Set shape's material attributes.
CdMatInpSk : --Sketch insertion Plane
CdMatInput : --Insertion Plane
CdMatInput2 : --Insertion Plane
CdMatInput3 : --Insertion Plane
CdMatInputPnt : --Insertion Plane
CdMchSrfBnd : --Match boundary edges of an untrimmed face to target curves
CdMedCrv : --Make a medial curve between two curves.
CdMedCrvEnds : --Make a medial curve between two curves.
CdMedSrf : --Create a medial surface from two NURBS surfaces.
CdMkGroup : --Make a group of entities
CdMoveAlgnFrm : --Move entity by aligning frames
CdMoveDir : --Move entities along direction
CdMovePnt2Pnt : --Move entity from point to point
CdMoveSwp : --Move entity along sweep path
CdMultiPntDist : --Create multiple points on curve at distance.
CdMultiPntNum : --Create N equally spaced points on curve.
CdNatAdd : --Attach a name tag to an entity
CdNatAdd2d : --Attach a name tag to an entity
CdNatDel : --Delete name tag.
CdNatDel2d : --Delete name tag.
CdNumEnt : --Input number by entity selection.
CdNumFace : --Select limiting face.
CdNumLen : --Length Input
CdNumPnt : --Select limiting point.
CdOpenEdgeDisp : --Show/Hide free edges.
CdPartBackup : --Backup historical data.
CdPartDel : --Erase entities.
CdPartDelAny : --Delete feature or entity.
CdPartDimEdit : --Modify dimension value.
CdPartEqn : --Edit equation set.
CdPartImpFace : --Import face or faceset.
CdPartModDim : --Modify dimension value.
CdPartNew : --Insert a part.
CdPartRefCrv : --Reference curve or edge.
CdPartRefCvt : --Unlink reference geometry
CdPartRefPln : --Reference plane.
CdPartRefPnt : --Reference point.
CdPickXor : --Set highlight mode.
CdPlayClrAll : --Clear all stop-points.
CdPlayClrStop : --Remove stop-point.
CdPlayContTo : --Replay history to specified feature.
CdPlayDel : --Delete next step in history replay.
CdPlayEnd : --Terminate history replay.
CdPlayHist : --Start history replay.
CdPlayRef : --Start external reference replay.
CdPlaySetStop : --Set a stop-point.
CdPlayStart : --Start history replay.
CdPlistCrv : --Define a curve list.
CdPlistCrv1 : --Define a curve list.
CdPlistCrv2 : --Define a curve list (child).
CdPln3pt : --Plane aligned with three points.
CdPlnAng : --Datum at an angle to a plane through 2 points.
CdPlnCrv : --Plane normal to a curve.
CdPlnNrm : --Plane perpendicular to a plane.
CdPlnOff : --Plane offset from a plane.
CdPlnPnt : --Plane located at a point.
CdPlnSrfTan : --Plane tangent to face at a point.
CdPlnXY : --Plane parallel to object XY axes.
CdPlnXZ : --Plane parallel to object XZ axes.
CdPlnYZ : --Plane parallel to object YZ axes.
CdPnt2Ln2Dst : --Point located at specified distances from two lines.
CdPntAlong : --Point located along a curve.
CdPntBetween : --Point located between two points.
CdPntCLine : -- Get centerline of a face
CdPntCci : --Point located at intersection of two curves.
CdPntCrvTan : --Direction along curve tangent
CdPntCsi : --Point located at intersection a curve and a surface.
CdPntDir : --Direction along plane axis
CdPntMid : --Curve midpoint.
CdPntOffset : --Point specified relative to a reference point.
CdPntOnFace : --Point on face
CdPntVecSfInt : --Intersect vector with a face.
CdPrfEqn : --Edit equation set.
CdPrfMod : --Modify an existing sketch
CdPrfModDim : --Modify dimension value.
CdPrfRefCrv : --Reference curve or edge.
CdPrfRefCrvInt : --Reference intersection of curve or edge.
CdPrfRefCvt : --Unlink reference geometry
CdPrfRefPnt : --Reference point.
CdPrfRefSec : --Reference intersection of sketch and face.
CdPrfRefSil : --Reference silhouette curve.
CdPrfShowGap : --Show connectivity information of curves.
CdProfDel : --erase sketch entities.
CdProfNew : --Create new sketch.
CdPtPop : --Points by pop-up option.
CdRadAdd : --Attach radius attribute to edge.
CdRadDel : --Delete "radius" attributes.
CdRadShowDim : --Toggle visibility of variable radius dimensions
CdRadiusAdd : --Attach radius attribute to curve.
CdRadiusDel : --Delete "radius" attributes.
CdRefitEdgCrv : --Refit an edge curve to tolerance.
CdRegenFacets : --Re-facet faces based on current view extent.
CdReplace : --Replace one entity with another.
CdRootAct : --Activate object.
CdRootCopy : --Copy a root object
CdRootDel : --Delete object(s).
CdRootEdit : --Activate an object for editing.
CdRootEqn : --Edit equation-set.
CdRootInq : --Inquire object.
CdRootMove : --Move a root object
CdRotateAdd : --Attach rotation factor to curve.
CdScale3D : --Scale entities.
CdScaleXAdd : --Attach X scale factor to curve.
CdScaleYAdd : --Attach Y scale factor to curve.
CdSewFreeEdgs : --Check/sew free edges in a topology table.
CdSewNearVtxs : --Check/merge near vertices in a topology table.
CdSfAnalzMenu : --Analyze faces
CdSfAtBndDel : --Delete face attribute bundle.
CdSfAtBndSet : --Save/update face attribute bundle.
CdSfAtEntGet : --Get entity face display attributes.
CdSfAtEntSet : --Set surface display attributes.
CdSfCpDraw : --Draw control net of faces
CdSfFair : --Fair face.
CdSfFitBnd : --Create a trimmed face fitting boundary curves.
CdSfFitSctBase : --Do you want to fix boundary curves of the base face?
CdSfFitSctDat : --Create a untrimmed face fitting a set of points
CdSfMdDof : --Modify DOFs of a face
CdSfMod : --Activate a face for local modification.
CdSfMvCpt : --Move control points.
CdSfNumIso : --Change number of isolines displayed for a face.
CdSfReduce : --Reduce number of control points.
CdShadeMode : --Toggle Gaussian curvature display on/off.
CdSheetEdit : --Activate sheet for editing.
CdSheetNew : --Insert a new sheet.
CdShellOffAdd : --Attach offset attribute to face.
CdShellOffDel : --Delete "offset" attributes.
CdShowAllDim : --Show all dimensions.
CdShowAllPrf : --Show all sketches.
CdShowAllSub : --Show all components.
CdShtDel : --erase entities.
CdSketchEdit : --Activate sketch for editing.
CdSketchNew : --Insert a new sketch.
CdSmdUnFold : --Create sheet metal from shape
CdSmtFocus : --Specify focus entity
CdSrfAnalyze : --Analyze face
CdSrfAnalz : --Analysis of one or more faces.
CdSrfFllt : --Create face fillet feature.
CdSrfMesh : --Surface from 4 boundary curves
CdSrfMeshTwist : --Adjust twist on mesh of curves
CdStlVerify : --Set Stl verification flag
CdSubNew : --Insert a new component.
CdSubPartNew : --Create new component.
CdSurfExt : --Extend base surface of a face.
CdSwapVis : --Swap visibility of all entities.
CdTTPrint : --Print contents of topology table
CdTTabHeal : --Heal topology
CdTagAdd : --Attach an ID tag to an entity
CdTagAdd2d : --Attach an ID tag to an entity
CdTagDel : --Delete ID tag.
CdTagDel2d : --Delete ID tag.
CdBomTblCrt : --Create a BOM table from view object.
CdBomTblRegen : --Regen a BOM list table.
CdTestCmd : --Test window input.
CdTestCmd2 : --Query blend attributes.
CdTestIsect : -- Test plane/face intersection
CdText1Pt : --Add text at insertion point.
CdText2Pt : --Add text between insertion point and alignment point.
CdTextBox : --Add text between the specified box points.
CdTextFtr : --Add annotation text.
CdTextModStr : --Modify text string.
CdTextShFnt : --Add font table at insertion point.
CdTopTabChk : --Inquire Topology Table
CdTouchUid : --Assign new unique ids to entities.
CdTrcOffset : --Offset trace profile
CdTriStrips : --Perform Tristripping
CdTrimQuick : --Trim away picked curve segment.
CdTtCmp : --Compare top-table to database.
CdTxAtBndSet : --Save/update text attribute bundle.
CdTxAtEntGet : --Get entity text display attributes.
CdTxAtEntSet : --Set entity text display attributes.
CdTxCheck : --Assign checkerboard texture to faces.
CdTxCopy : --Copy texture attribute from one face to another.
CdTxDent : --Assign "dent" texture to faces.
CdTxGranite : --Assign granite texture to faces.
CdTxMapBump : --Assign bump texture to faces.
CdTxMapColor : --Assign color texture to faces.
CdTxMapSten : --Assign stencil to faces.
CdTxMarble : --Assign marble texture to faces.
CdTxRm : --Remove texture attribute from faces.
CdTxWood : --Assign wood texture to faces.
CdTxtPnt : --Add text at insertion point.
CdUnBlankAll : --Unblank all entities.
CdUnHi : --Unhighlight all objects
CdUnfreezeAll : --Unfreeze All
CdUnfreezeObj : --Unfreeze entities.
CdV3ActPart : --Activate reference part of view object.
CdV3Auto : --Automatic view layout
CdV3Delete : --Delete views.
CdV3EditLabel : --Edit the label of a view
CdV3Ins : --Insert standard view of part
CdV3InsAux : --Insert Auxiliary view of part
CdV3InsDetCir : --Insert circular detail view of part
CdV3InsDetRect : --Insert rectangular detail view of part
CdV3InsPrj : --Insert projected view of part
CdV3InsSect : --Insert section view of part
CdV3Move : --Move view
CdV3RedefX : --Redefine section definition.
CdV3SetHLR : --Set view display attributes.
CdV3SetPart : --Set view part.
CdV3SetScale : --Set view scale.
CdV3TglExp : --Toggle explode mode of view.
CdV3Update : --Update layout views.
CdViewDel : --Delete views.
CdViewDelAll : --Delete all views.
CdViewDir : --Align view with "up" and "right" directions.
CdViewPln : --Align view with plane
CdViewRcl : --Recall view.
CdViewSto : --Store view.
CdVrmlPathInp : --VRML path parameter
CdVuAxis : --Set view rotation axis.
CdVuPnt : --Set view origin
CdWireFaces : --Set faces to wireframe display mode.
CdWireShade : --Toggle faces between wireframe/shaded display
CdWireType : --Toggle curve type (construction/shape geometry).
CdWireType : --Toggle curve type (construction/shape geometry).
CdftrForm : --CAD Feature
CenterShapeForm : --Center Tool Shape
CmEditPlan : --Create/activate Plan.
CmInpCdftrAdd : --Select feature
CmInpCrvSrfSel : --Select surface or curve
CmInpCurvSel : --Select curve or edge
CmInpHoleAdd : --Select curves or surfaces as holes
CmInpNCmp : --Select Component
CmInpPlace : --Input Nest Component
CmInpPlane : --Select Plane.
CmInpPntOnCrv : --Point input on entity
CmInpPntsOnCrv : --Points input on entity
CmInpPockAdd : --Select pocket profiles or surfaces
CmInpPoint : --Points Input
CmInpPoints : --Points Input
CmInpProfAdd : --Select profiles or curves
CmInpSlotAdd : --Select step profiles or surfaces
CmInpSolidAdd : --Select solid
CmInpStepAdd : --Select step profiles or surfaces
CmInpSurfAdd : --Select surfaces
CmInpSurfSel : --Select surface or face
CmInpVector : --Input direction.
CmObjList : --Object List
CmPlanNew : --Insert a plan.
CmPln3pt : --Plane aligned with three points.
CmPlnAng : --Datum at an angle to a plane through 2 points.
CmPlnCrv : --Plane normal to a curve.
CmPlnNrm : --Plane perpendicular to a plane.
CmPlnOff : --Plane offset from a plane.
CmPlnPnt : --Plane located at a point.
CmPlnXY : --Plane parallel to object XY axes.
CmPlnXZ : --Plane parallel to object XZ axes.
CmPlnYZ : --Plane parallel to object YZ axes.
ContFeats : --Features in Containment
Containment : --Containment Definition
CsinkShapeForm : --Countersink Tool Shape
CsrfAttrForm : --Control Surface Attribute
CtrlSurfForm : --Control Surfaces
CurvAttrForm : --Curve Attribute Modify
CutArcEditForm : --Arc Cut Modify
CutEditSdFdForm : --Edit operations
CutPntEditForm : --Edit Cut Point
DmAlnBas : --Create baseline aligned dimensions between points.
DmAlnCnt : --Create continuous aligned dimensions between points.
DmAlnNrm : --Create an aligned dimension between points.
DmAlnOrd : --Create ordinate aligned dimensions between points.
DmAng2LnNrm : --Create a 2 entity angular dimension.
DmAng3Pt : --Create a 3-point angular dimension.
DmAngArcNrm : --Create an angular dimension on an arc.
DmAngHorNrm : --Create a horizontal angular dimension.
DmAngVerNrm : --Create a vertical angular dimension.
DmAtBndCmdSet : --Save/update dimension attribute bundle.
DmAtEntCmdGet : --Get entity dimension display attributes.
DmAtEntCmdSet : --Set entity dimension display attributes.
DmBalloon : --Create a Balloon dimension.
DmCenter : --Create a center line/mark dimension.
DmChmfANrm : --Create a chamfer dimension.
DmChmfHVNrm : --Create a chamfer dimension.
DmChmfLNrm : --Create a chamfer dimension.
DmDatum : --Create a Datum Target Point.
DmDatumTc : --Create a Datum Target Area.
DmDatumTp : --Create a Datum Target Point.
DmDiaNrm : --Create a diametric dimension.
DmEntity : --Dimension an entity.
DmFCS : --Create a Feature Control Symbol.
DmFCSLeader : --Create a Feature Control Symbol.
DmGetAng : --Get new dimension value.
DmGetDst : --Get new dimension value.
DmGetNum : --Get new dimension value.
DmHorBas : --Create baseline horizontal dimensions between points.
DmHorCnt : --Create continuous horizontal dimensions between points.
DmHorNrm : --Create a horizontal dimension between points.
DmHorOrd : --Create ordinate horizontal dimensions between points.
DmKillVar : --Unlink dimension from variable
DmLeader : --Create a Leader dimension.
DmModAlign : --Align dimension text.
DmModDLAdd : --Add dogleg points.
DmModDLDel : --Remove dogleg points.
DmModGrpAdd : --Insert dimension to a chain dimension.
DmModGrpDel : --Remove dimension from a chain dimension.
DmModTxtPt : --Modify dimension text point.
DmModTxtPt : --Modify dimension text point.
DmModTxtStr : --Modify dimension text string.
DmOffNrm : --Create an offset dimension between parallel lines.
DmOffSNrm : --Create a projected dist dimension between a line and a pnt.
DmPrjBas : --Create baseline projected dimensions between points.
DmPrjCnt : --Create continuous projected dimensions between points.
DmPrjNrm : --Create a projected dimension between points.
DmPrjOrd : --Create ordinate projected dimensions between points.
DmRadBgNrm : --Create a big radial dimension.
DmRadBkNrm : --Create a broken radial dimension.
DmRadNrm : --Create a radial dimension.
DmRefToggle : --Toggle dimension reference status On/Off.
DmRotBas : --Create baseline rotated dimensions between points.
DmRotCnt : --Create continuous rotated dimensions between points.
DmRotNrm : --Create a rotated dimension between points.
DmRotOrd : --Create ordinate rotated dimensions between points.
DmSetVar : --Link dimension to variable.
DmSmart : --Dimension an entity.
DmSmart : --Dimension an entity.
DmVerBas : --Create baseline vertical dimensions between points.
DmVerCnt : --Create continuous vertical dimensions between points.
DmVerNrm : --Create a vertical dimension between points.
DmVerOrd : --Create ordinate vertical dimensions between points.
FrameForm : --Frames in Setup
FtAsmAdd : --Add part to assembly.
FtAsmCutExt : --Cut assembly
FtAsmIsect : --Intersect component with assembly.
FtAsmSub : --Subtract component from assembly.
FtBoolAdd : --Perform a boolean add between two facesets
FtBoolIsect : --Perform a boolean intersection between two facesets
FtBoolRm : --Perform a boolean remove between two facesets
FtBossEllso : --Create ellipsoid boss feature.
FtBossExt : --Create extruded boss.
FtBossLft : --Create lofted boss.
FtBossRev : --Create revolved boss.
FtBossSph : --Create spherical boss feature.
FtBossSwp : --Create swept boss.
FtBossVarSwp : --Create variational swept boss.
FtCCCirle : --Create circular surface
FtCCConic : --Create conic surface
FtCCLine : --Create linear surface
FtChamConst : --Constant radius chamfer
FtChamRadAt : --Chamfer Radius Attributes
FtCnLnAuto : --Create a connecting line.
FtCnLnDef : --Create default connection lines.
FtCnLnDel : --Delete connection line(s).
FtCnLnMod : --Modify connection line
FtCompCir : --Circular array of components
FtCompLin : --Instance a part.
FtCompMir : --Mirror instance of components
FtCompPnt : --Pattern components at specified locations.
FtConnForm : --Connection lines
FtContAdd : --Attach a continuity tag to an edge
FtContForm : --Continuity
FtCrTrimPln : --Create a trimmed plane.
FtCutEllso : --Create ellipsoid cut feature.
FtCutExt : --Create extruded cut.
FtCutLft : --Create lofted cut.
FtCutRev : --Create revolved cut.
FtCutSph : --Create spherical cut feature.
FtCutSwp : --Create swept cut.
FtCutVarSwp : --Create variational swept cut.
FtDivFcsToCvs : --Create face split feature.
FtDraftAngChk : --Check faces for draft angle violations
FtDraftNtrlEdg : --Draft faces about a neutral edge
FtDraftNtrlFc : --Draft faces about a neutral face
FtDraftPlCv : --Draft faces about parting curves.
FtDraftPln : --Draft faces about a neutral plane
FtEdSplit : --Split an edge.
FtFlltConst : --Constant radius fillet
FtFlltCrnDim : --Corner dimensions for fillet
FtFlltCrnRad : --Fillet corner radius
FtFlltFace : --Face fillet
FtFlltQuick : --Constant radius fillet
FtFlltRadAt : --Fillet Radius Attributes
FtHole : --Create Hole Feature.
FtHoleBore : --Create Counter-Bore Hole Feature.
FtHoleSink : --Create Counter-Sink Hole Feature.
FtHoleTaper : --Create Tapered Hole Feature.
FtLoftCnLn : --loft
FtLstEdgIdx : --Attach a continuity tag to edges
FtMrge4PntSph : --Create 4 point spherical feature.
FtMrgeEllso : --Create ellipsoid base feature.
FtMrgeExt : --Create extruded solid.
FtMrgeLft : --Create lofted solid.
FtMrgeRev : --Create revolved solid.
FtMrgeSph : --Create spherical base feature.
FtMrgeSwp : --Create swept solid.
FtMrgeVarSwp : --Create variational swept solid.
FtOffsetFace : --Offset a face
FtOffsetSurf : --Create offset surface.
FtPunch : --Perform a Punch operation between two facesets
FtSfExt : --Create extruded face.
FtSfInvert : --Invert loop(s) of a face
FtSfLft : --Create lofted face.
FtSfMesh : --Create a face from a mesh of curves.
FtSfNPatch : --Create a n-sided surface patch feature.
FtSfRev : --Create revolved face.
FtSfSplit : --Create face split feature.
FtSfSwp : --Create swept face feature.
FtSfTrim : --Create face/faceset trim feature.
FtSfUntrim : --Delete face trim loops
FtSfVarSwp : --Create variational swept surface feature.
FtShell : --Create shell from shape
FtShlMirror : --Mirror a entity.
FtShlPtnCir : --Make a circular pattern of a entity.
FtShlPtnLin : --Make linear pattern of a entity.
FtShlPtnPnt : --Pattern entity at specified locations.
FtShrink : --Volume offset
FtSolidDiv : --Divide solid(s) with open faceset(s).
FtSolidTrim : --Create Solid trim feature.
FtSpatula : --Replace faces.
FtSubBoss : --Create a "boss" feature from a component.
FtSubCut : --Create a "cut" feature from a component.
FtSubMerge : --Merge a component with the active part.
FtSubSew : --Merge and sew a component with the active part.
FtTestSew : --Test shell sewing.
FtTrimFcsToCvs : --Create face trim feature.
HoleForm : --Hole Feature Set Manager
WrArcChnEnd : --Create arcs connected tangentially.
WrAreaInPt : --Get inside point
WrCirCBBnd : --Create circle from its center and boundary point.
WrCpDstPnt : --Get destination point for copy
WrCrArc2ptR : --Create arc from end points and radius.
WrCrArc3pt : --Create arc from start, end and circumference points.
WrCrArcCSE : --Create arc from center, start, and end point.
WrCrArcChn : --Create arcs connected tangentially.
WrCrCir2ptR : --Create circle from its two boundary points and radius.
WrCrCir3pt : --Create circle from its three boundary points.
WrCrCirCB : --Create circle from its center and boundary point.
WrCrCirCR : --Create circles from radius(diameter) and its center points.
WrCrCirCR : --Create circles from radius(diameter) and its center points.
WrCrDblLine : --Create a double-line
WrCrElpsCP : --Create an ellipse with center and diagonal point
WrCrElpsCP2 : --Create angled ellipse.
WrCrElpsP2 : --Create an ellipse with two diagonal points.
WrCrElpsP3 : --Create an angled ellipse with 3 vertices.
WrCrHat2D : --Create a crosshatch.
WrCrLn2pt : --Create line
WrCrLnAngle : --Create angle line
WrCrLnHoriz : --Create horizontal line
WrCrLnPara : --Create parallel line
WrCrLnPerp : --Create perpendicular line
WrCrLnPoly : --Create polyline
WrCrLnSeg : --Create line
WrCrLnVert : --Create vertical line
WrCrNgonEdg : --Create n-side polygon with an edge.
WrCrNgonIn : --Create n-side inscribed polygon of circle
WrCrNgonOut : --Create n-side circumscribed polygon about circle
WrCrPolyEnd : --Create polyline
WrCrPtPop : --Create point by pop-up option.
WrCrRectCP : --Create a rectangle with center and diagonal point
WrCrRectCP2 : --Create angled rectangle.
WrCrRectP2 : --Create a rectangle with two diagonal points.
WrCrRectP3 : --Create angled rectangle with 3 vertices.
WrFemGetCnstr : --Specify a pair of (source, target) points or press <Escape>.
WrFmContinue : --Continue
WrFmInqAng : --Measure Angle
WrFmInqArc3P : --Inquire 3 point arc data
WrFmInqArea : --Inquire area properties
WrFmInqCoord : --Show coordinate
WrFmInqCrv : --Inquire curve information
WrFmInqDist : --Measure Distance
WrFmInqLen : --Measure Length
WrFmInqNrbCrv : --Inquire NURB curve information
WrHatInPt : --Get inside point of hatch area
WrHatRegen : --Regen a crosshatch entity.
WrInpHatReg : --Redefine hatch boundary
WrInqAng2V : --Inquire angle by two vectors
WrInqAng3P : --Inquire angle by 3 points
WrInqAng4P : --Inquire angle by 4 points
WrInqArc3P : --Inquire arc data from 3 points
WrInqArea : --Inquire area properties
WrInqCoord : --Show coordinate
WrInqCrv : --Show curve's information
WrInqDist : --Show distance between two points.
WrInqLen : --Show distance between two points.
WrInqNrbCrv : --Show curve's NURB information
WrMdBiarc : --Convert curve to arcs and lines
WrMdBoolCut : --CUT a Profile with another Profile
WrMdBoolCvs : --Join profiles to make outer boundary
WrMdBoolInt : --INTERSECT two Profiles
WrMdBoolJoin : --JOIN two Profiles
WrMdChmChn : --Chamfer a chain of curves
WrMdChmDAng : --Place a chamfer between two boundary curves.
WrMdChmDst1 : --Place a chamfer between two boundary curves.
WrMdChmDst2 : --Place a chamfer between two boundary curves.
WrMdCmprss : --Compress (merge) primitive curves
WrMdConcatCrv : --Concatenate a list of curves
WrMdCopy2D : --Copy a set of curves
WrMdCorner : --Make a corner from two curves
WrMdDof : --Refit curve with specified # of control points and degree
WrMdDrag2D : --Drag a critical point of geometry.
WrMdDrag2D : --Drag a critical point of geometry.
WrMdFem : --Modify a curve by constraints
WrMdFltChn : --Fillet a chain of curves
WrMdMir2D : --Mirror curves
WrMdMove2D : --Move a set of curves
WrMdOffChain : --Offset a chain of curves
WrMdRot2D : --Scale curves
WrMdScl2D : --Scale curves
WrMdShrExt : --Trim or extend curve(s)
WrMdStrch : --Stretch critical points.
WrMdSym2D : --Mirror geometry.
WrMdTrmBnd : --Trim/break curve(s)
WrNotch2d : --Make a notch on curve.
WrSmtDraw2D : --Create 2D connected curves.
WrSmtDraw2D : --Create 2D connected curves.
