PARTreplace (2D)
Applications 
PARTsolutions (Sketch/Sheet
Level)
Use this command to open the PARTsolutions PARTviewer application for replacing a layout view in the active VX drawing sheet with a 2D view of a PARTsolutions component. Refer to the PARTsolutions documentation about using the PARTviewer application. A valid license of PARTsolutions is required to operate this command.
Pick PARTreplace from the PARTsolutions Menu.
Select the layout view in the active VX drawing sheet to replace.
The PARTviewer application will be loaded.
Select the part group and load it into PARTviewer.
Select the part you want from the table (it will be displayed in the 3D preview window).
Pick the 2D View icon
to display the 2D View window.
From the 2D View window, select the view to create (e.g., Front, Rear, Right, etc.).
In PARTviewer, pick the
Export to CAD System icon 
.
PARTviewer will either collapse or exit depending which icon is selected in step 7.
The selected layout view will be replaced using the same view label and view scale as the original layout view.
