PARTassembly (2D)
Applications 
PARTsolutions (Sketch/Sheet
Level)
Use this command to open the PARTsolutions PARTassembly application. You can then select a 2D view of a dynamic assembly and insert it as a layout view in the active VX drawing sheet. A dynamic assembly refers to one that can be altered within PARTsolutions prior to inserting it. Note that an assembly is first created and added to the active VX file before the insertion occurs. Refer to the PARTsolutions documentation about using the PARTassembly application. A valid license of PARTsolutions is required to operate this command.
Pick PARTassembly from the PARTsolutions Menu to load the PARTassembly application.
Select the part group and load it into PARTassembly.
Select the assembly you want and modify it as desired.
Pick the 2D View icon
to display the 2D View window.
From the 2D View window, select the view to create (e.g., Front, Rear, Right, etc.).
In PARTassembly, pick
the Export to CAD System icon 
.
PARTassembly will either collapse or exit depending which icon is selected in step 6.
Select the view location point.
Enter the view scale factor.
Enter the view label.
The view is created in VX and displayed in the active drawing sheet.
