PARTviewer (2D)
Applications 
PARTsolutions (Sketch/Sheet
Level)
Use this command to open the PARTsolutions PARTviewer application. You can then select a 2D view of an individual part or static assembly and insert it as a layout view in the active VX drawing sheet. A static assembly refers to one that cannot be altered within PARTsolutions.
Use the PARTassembly command to access dynamic assemblies that can be modified within PARTsolutions prior to inserting them. Refer to the PARTsolutions documentation about using the PARTviewer application. A valid license of PARTsolutions is required to operate this command.
Pick PARTviewer from the PARTsolutions Menu to load the PARTviewer application.
Select the part group and load it into PARTviewer.
Select the part you want from the table (it will be displayed in the 3D preview window).
Pick the 2D View icon
to display the 2D View window.
From the 2D View window, select the view to create (e.g., Front, Rear, Right, etc.).
In PARTviewer, pick the
Export to CAD System icon 
.
PARTviewer will either collapse or exit depending which icon is selected in step6.
Select the view location point.
Enter the view scale factor.
Enter the view label.
The view is created in VX and displayed in the active drawing sheet.
