CAM Form Filters

To the left of many CAM Manager Form buttons are check boxes that can be selected (refer to the CAM Tool Manager Form below). These check boxes are used to filter lists of CAM objects. The attribute value displayed for that field will be used as a search key if the box is checked.

For example, to search for all tools of type "mill":

1. Open the CAM Tool Manager.

2. Open a tool library.

3. Pick the Type button and select "mill."

4. Put a check in the box to the left of the button.

5. Pick the Apply Filter --> button.
   Only the mill tools will be listed.

CAM Tool Manager Form