Scale Part Entity
Edit (Part
Level)
This command modifies the scale of selected
entities. You can enter uniform or non-uniform scale factors. The
types of entities that you can scale include shapes, sketches, components,
curves (including lines, arcs and circles), dimensions, 3D points and
point blocks.
Entity - Select the entities to scale.
Method
- Select the scale method.
Uniform - make the X, Y, and Z scale factors the same and go to
step 5 (see above).
Non-Uniform - make the X, Y, and Z scale factors differ and go
to step 6 (see above).
Uniform - If Uniform is selected in step 4, enter the uniform scale factor and go to step 9.
X scale - If Non-Uniform is selected in step 4, enter the X scale factor or middle-click to skip.
Y scale - Enter the Y scale factor or middle-click to skip.
Z scale - Enter the Z scale factor or middle-click to skip.
Plane - Select a reference plane to scale about or middle-click to select the default X,Y datum plane.
Center - Select a point to define the center of scaling or middle-click to select the default origin of the datum plane.
