Curve Spiral (3D)
Insert 
Wireframe Curves
(Part Level)
Use this command to create a curve that spirals
about an axis. A start point and the axis will define the diameter of
the spiral. The number of turns and the total distance to travel is also
specified. Optional inputs include a taper angle and the ability to control
the direction of the spiral.
Start point - Select the start point.
Axis - Select the spiral axis.
Turns - Specify the number of turns.
Distance - Specify the distance along the axis per turn.
Taper - Specify the taper angle.
Revolve clockwise - Check this box to revolve the spiral clockwise.
Use the pick
filter
and input
options
when available.
See Command Options Forms for any options not shown here.
