This command replaces the part model associated with a layout view. The new part will then be displayed for that view. First select the layout view to modify. Then specify the new part to reference. You can select from the default list of parts in the active file or pick the folder icon to select another VX file using the File Browser.

 

You cannot use this command on anything other than the base view (TOP, BOTTOM, etc..).  Views with a reference view (sections, details, projection, and/or auxiliary views) cannot be used.

 

 

 

This command modifies the label text of a layout view. You can also use this command to add a label to a view created without one. Select the layout view to modify and then specify the new label text.

 

 

 

This command modifies the scale factor of a layout view. The drawing sheet scale factor is ignored within layout views. The individual view's scale sets the scale factor for that view. The drawing sheet scale factor only applies to "independent" geometry that is not associated with any layout view.

 

• Select the layout view and then enter the new scale factor.

 

 

 

This command edits the view attributes for existing layout views. Changes made by this command are only applied to the indicated views. The default view attributes defined in the View Attributes Form are not affected. Refer to the View Attributes Form for a description of each attribute.

 

 

 

If the referenced assembly of a layout view has multiple component configurations, use this command to change the configuration. First select the layout view to modify.   Then, if the reference assembly has component configuration, select one from the list.

 

 

 

 

This command activates the part model associated with a layout view for editing. Right-click on the layout view and select Edit Part from the Object Editor menu. The part will be activated for editing. When you're done editing the part, pick Go up to Parent Object from the Tool Bar to return to the active drawing sheet.

 

 

 

Use this command to regenerate layout views. This will incorporate the latest part design information into the drawing sheet. Select the views to update or middle-click to update all views. Pick Yes or No to proceed with the update. This command is located on the Tool Bar.

 

Optional Inputs

 

Regenerate unmodified views

Check this box to force the regeneration of any views whose referenced part models have not been modified.