Detail Views
Insert 
3D View (Drawing Sheet Level)
Use this command to create circular and rectangular
detail views from another 3D layout view. The line and color attributes
defined in the Options Form refer
to the detail border. Detail views adopt the view attributes of the base
view they are derived from but are not linked to them (i.e., you can change
them). You can right-click on a detail view and select Attributes
to change them.
Disabling view regeneration of the base view also applies to any detail views dependent on them. Likewise, you must enable view regeneration of the base view for it to apply to detail views.
|
|
This method creates a circular detail view. The Points input (see below) defines the center and radius points of the circular border. |
|
|
This method creates a rectangular detail view. The Points input (see below) defines the diagonal points of the circular border. |
|
|
This method creates a polyline detail view. The Points input (see below) defines the diagonal points of the circular border. |
Base view - Select the layout view to create a detail from.
Points - Select the center, diameter, diagonal or polyline points to define the detail view border depending on the icon type selected above.
Note point - Pick the detail note location.
Multiplier - Enter the scale factor for the detail view.
Location - Select a location for the detail view.
Color, Style, Width, Layer - These options set the attributes for the detail border. Select the color, line style, line width and layer for the border from the popup menus and list provided.
Show label - Pick the check box if you want to display the detail label and enter a label only if you want to override the automatic sequencing.
Show label prefix - Check this box to show the label prefix (e.g., "Detail") otherwise it will not be displayed. This option can also be set for all drawing sheets using the Layout View Attributes Form but can be overridden here.
Annotation - This sets the annotation text color. Select a color from the popup menu.
Height - This sets the annotation text height of the scale and label text.
Use Caution when Deleting Layout Views (see CAD Tips & Techniques).
Adding Dimensions to 3D Layout Views (see CAD Tips & Techniques).
