Line Perpendicular to Reference Line (3D)
Insert
Wireframe Line (Part Level)
Use this command to create a line between two points
and perpendicular to a reference line, edge, or direction. A reference
point is selected that along with the reference line, determines the plane
on which the line resides.
The start point locates the line in relation to the reference
line. The end point of the line can be a point or a distance from the
start point.
Direction
Specify the reference direction. You can select a line or edge or right-click for more input options.
Base point
Select a point that along with the reference direction will determine the plane on which the line resides.
1st point
Select the start point of the line.
2nd point
Select the end point. You can drag the line to its end, enter a distance from the start point, or right-click for more input options. The line will be constrained perpendicular to the reference line, edge or direction.
