Edit Dimension Tolerance (2D)
Edit
Dimension Modify Tolerance
Use this command to
modify the tolerance displayed for a dimension on a drawing sheet. First
select the dimension to modify. Then
select the tolerance type icon and enter the tolerance value. Refer
to the tolerance types and inputs below. To
set these attributes for all new dimensions, select Attributes
> Dimensions and use the Dimension Attributes
Form.
|
|
No tolerance. |
|
|
Limit tolerance. Enter the upper dimension value in the upper tolerance field and the lower dimension value in the lower field. |
|
|
Unequal tolerance. Enter the upper tolerance value in the upper tolerance field and the lower tolerance value in the lower field. |
|
|
Equal tolerance. Enter the equal tolerance value in the upper tolerance field. |
