Ellipse

Menu access: Curve | Other curves | Ellipse

Description:

Allows you to create an ellipse.

General philosophy:

1. Select the center point.

2. Enter the radius value along X or select a point.

3. Enter the radius value along Y or select a point.

Available Option(s) :

You can choose to drive the  Diameter  or  Radius  for each axis (in case you create an ellipse by center and radius).

You can create an ellipse by two focus and a passing point by selecting the  2 FOCUS  button.

Example(s):

Specific point(s):

Selecting a point for the second question defies the radius and the X axis direction of the ellipse at the same time. The second point gives the radius along Y by projection of the point on the Y axis.

Available modification(s)

You can modify the radius values using the îcon .