Configure by 3 points

Menu access : Curve | Other curve | Digitalize | Configure 3 points

Description :

Allows to configure user space by three reference points.

General philosophy :

1. Locate a point in the graphic area.

2. Locate the corresponding point on the digitizer.

3. Locate a second point in the graphic area.

4. Locate the corresponding point on the digitizer.

5. Locate a third point in the graphic area.

6. Locate the corresponding point on the digitizer.

Then the configuration is done, now you can use one of the digitizing curve function.

Specific point(s) :

The three points allows to orient the digitizing in the graphic area and to define a reproduction scale.

An axis is defined by the three points, so an axial deformation of drawing to digitize is possible.