|
|
|
|---|
|
|
|
|---|
Local cross section
Menu access : View | Local cross section
Description :
Allows to locally create cross section using a curve as limit.
General philosophy :
Select the reference view..
Pick the limit curve of the cross section or use CONTOUR to create it. The contour had to be a closed curve.
Pick the reference element
defining the cross section depth.
Example(s) :
|
|
|
Available option(s):
The POINT
button allows
you to select a point in the 3D document or a projected point in a 2D
view (stemming from the projection of a point of the 3D document).
Specific point(s) :
If the document contains only one
view, the selection of the reference view is not required.
The limit curve have to be closed,
you can use contours or curves.
|
|
|
For element who don't have to be
cut, use the DIVISIBLE
option
of the Attribute
| Properties function to declare them as non divisible.
It is possible to set the attributes
of the local section border, in Tools |
Options "Drafting view - Attributes - Trimming curve".
Possible modification(s) :
You can change the limit curve by
moving it's control points with the 
function.
The 
allows to change
the projection parameters of the reference view or the cutting curve.
