a - Apply a draft on the face 2.
b - Select the red edge as reference edge.
Draft on reference face:
The draft on reference face allows you to extend the draft of the reference face to the selected face : the reference face geaometry replace the one of the selected face.
|
|
a - Apply a draft on the face 2.
b - Select the red edge as reference edge. |
|
Here is the result you get after the drafting. |
Now, if you apply a draft to the face 3 with the face 2 as reference face, youget the following result: |
|
|
The face 3 lost its cylindrical geometry and become a conical face as the reference face. |
