|
|
|
|---|
|
|
|
|---|
Remove
Menu access: Shape | Surfacic / boolean operations | Remove
Description:
Allows you to remove a face a body or a loop curve from a shape (surface or solid). If you remove a face from a solid it becomes automatically an open surface.
General philosophy:
Choose the type
of element to remove in the list, in the FACE
mode you can select several faces of the same part with the 
icon.
Select this element.
Available option(s):
When you remove a face,
you can choose a healing mode:
NONE: let the hole appeared due to the removing of the face.
CAP: try to create a surface to fill up the hole.
EXTEND: try to extend the neighbouring faces until the hole is filled up.
BLEND: same principle as "EXTEND" but this mode is better for the removing of blend or chamfer.
The "BLEND"
cicatrisation mode cannot be used to remove chamfer surfaces. It works
only for blends surface type.
The type of element: body
allows you to remove or separate a body from a muti-body shape.
Click on the Body to remove button to change it into Body to separate button.
You can choose to remove a loop curve from a trim surface, it will
produce a local untrim of the surface.
Specific point(s):
By removing a face from
a solid object it becomes a surface.
