Types of drilling

Back to: Drilling hole

You can define the type of the drilling in the following dialog box.

Select a drilling type to get more informations about it.

The parameters you can modify for the hole+boring are depending on the option you choose from the left list (hole or boring):

For the hole:

Blind - the hole is not supposed to go through the complete part and you can enter a drilling depth.

Through one - the hole will go through the first wall of your part.

Through all - the hole will go through the complete part.

Diameter - defines the drilling diameter.

Depth - is only accessible when using a blind hole, you enter the drilling depth you want. This depth can be defined to the end of the cylindrical portion of the drilling or to the tip point of the drilling.

Bottom angle - is only accessible when using a blind hole, you enter the bottom angle of your drilling.

Simplified - displays the drilling in a simplified way (only the drilling axis will appear).

Axis - displays the drilling axis.

For the boring:

Blind - the boring is not supposed to go through the complete part and you can enter a boring depth.

Through one - the boring will go through the first wall of your part.

Through all - the boring will go through the complete part.

Depth - defines the boring depth.

Diameter - defines the boring diameter.

Simplified - displays the boring in a simplified way (only the boring axis will appear).

Axis - displays the boring axis.