Topsolid online Help Index

Partial areas definition

Links:

Select a tec file

Purpose

Define the cutting parameters for the roughing, finishing and all the offsets.

How to use

1. Select the menu "Wire operation |  Partial areas |  A profile","Wire operation |  Partial areas |  2 profiles" or "Wire operation |  Partial areas |  Surface machining"

2. Select on the tec file the required power settings (operations) to use.

3. Specify the different parameters in the tab dialogue box which appears.

4. Enter the comment which appears on the machine block listing meant for the NC operator. This comment will also appear when the user wishes to take a look at or modify an operation, using the Operation/ operations manager function.

5. Eventually, enter a codified remark which will be interpreted by the post-processor, in a specific manner predefined by the user and the post-processor redactor.

6. Validate entries made into the dialogue box by clicking on OK.

Dialog box

Links:

'Lead in and lead out' tab

'Offsets' tab

Click the various zones of the image below to have help  

Topsolid online Help Index