|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Cut two profiles
Icon: 
Menu: Wire operations | 2 profiles
Links:
How to use - Case 1 : With duplication
How to use - Case 2 : Without duplication
Cut following two profiles is useful in the case of an evolutionary cut, this operation is going to follow curves defined by the user with movements following four axes or possibly two axes if curves are identical.
The toolpath generated by TopSolid / Wire will follow the two curves defined by the user.
If the two curves have the same number of elements,
then TopSolid/Wire will synchronize the cut element by element.
If the two curves don't have
the same number of elements, then TopSolid/Wire will synchronize the cut
according to the length of every curve.
How to use
Select the menu"Wire
operations | 2 profiles" or click on the icon.
Click on the DUPLICATION icon.
Select the master operation to use on the graphic area. In this case, the two cuts are linked together. If the user change one parameter of one cut, the two cuts are updated.
Select the bottom profile to machine.
Define the material side direction.
Select the top profile to machine.
Select the parameters for the main cut operation (Roughing, finishing..)
Select the menu"Wire
operations | 2 profiles" or click on the icon.
Select the bottom profile to machine.
Define the material side direction.
Select the top profile to machine.
Select on the tec file the required power settings (operations) to use.
Select the parameters for the main cut operation (Roughing, finishing..)
Topsolid online Help Index
