Fillet

This value defines the fillet value to add on the selected corners.

Case of a profile with concave angle:

Value :

It's the fillet value  R1, as described in the following drawing.

Value to add :

If Value = 0 thens R1 = Offset + Value to add

If Value <> 0 then this parameter is NOT used.

The black profile is the part.

The green line is the toolpath

Case of a profile with convex angle:  

Value :

It's the fillet value  R1, as described in the following drawing.

Value to add :

If Value = 0 thens R1 = Offset + Value to add

If Value <> 0 then this parameter is NOT used.

The black profile is the part.

The green line is the toolpath

Topsolid online Help Index