Topsolid Progress online Help Index

Topsolid Progress online Help Index

Drill Table

Icon Access:

Menu Access:

Progressive die | Drill table

Description:

Creates a table that lists all the drilling done on a view.

General procedure:

1. Choose a drill table template from the window:

Click on the different zones of the image below

2. Choose the reference view.

3. Indicate the origin X and Y coordinates by clicking on a point or by choosing the option USE REFERENCE VIEW ORIGIN .

4. Indicate the Z origin coordinate (reference plane) by clicking on a reference element on another view or use the option ORIGIN DEFINED IN 3D MODEL then select a point on the template document.

5. Click on a point on the screen to define the upper left corner of the table.

6. Click on a second point to define the table's width (the text is automatically adjusted), or click on FREE SIZE for the dimensions to fit the default text height.

Available option(s):

     The Allow inverted drills = YES / NO option takes into account the drills located on the face counter to the reference face.  

     You can select the origin of the Z coordinates in the 3D template with the option:ORIGIN DEFINED IN 3D MODEL

Special remarks:

Only drills with a direction perpendicular to the reference view are considered in the table

Topsolid Progress online Help Index