|
|
|
|---|
|
|
|
|---|
Topsolid Progress online Help Index
Topsolid Progress online Help Index
Plates configuration
Icon Access: 
Menu Access:
Progressive die | Die set | Create die set
Description:
Creates a die set that may or may not be associated with an existing strip.
General procedure:
Click on the different fields of the image below
Reminder of the positions of the coordinate systems of the different sets that can still be modified in this window.
Define the plates on each set:
They are listed in the windows of each set. You can modify their positions with the management buttons.
You can add two types of plates: non standard plates that can be piloted by length, width and height (you can modify other pilot parameters depending on the plate you want) and standard plates from suppliers (managed by catalog). You can also create your own standard plates.
Click on the different fields of the image below
The dimension in the references correspond to the reference lengths added to the margins defined on the first tab. They dimension the default plates and can still be modified in this window.
Select the plate to add from the list:
Standard plates can be piloted by their main pilots as well as other pilots: example of plate that has other pilots
Plates provided by suppliers are selected by their reference. These references can be limited by constraints on the plate dimensions: these constraints can be the reference lengths: example of selection by reference
Topsolid Progress online Help Index
