|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Part modification - Manual mode
Icon access: 
Menu access : -
Description:
Allows to report the part modification during the mold design.
General procedure:
You receive your new PDD from your customer. You have to "paste" the new geometry on the @ of the first part, to keep the link with the mold design.
Isolate the new surfaces.
Open the file of the first part. "Save as..." with another name.
Unsew the old surfaces on your initial part, to get common edges with the new geometry.
With Edit | Duplicate, you bring back in your design the new surfaces.
Break associativity of the imported surfaces.
Sew IN ASSOCIATIVE MODE the "old" part with the new surfaces.
Be careful
to the first target. The first part has to be this target to keep in memory
the @.
Save your top file.
open the mold file, "Save as..." another name.
Launch the function File | Reroute, find in the list the name of the previous part, and link it to the new file.
The mold design is updated.
Specific point(s) :
You have
then to "repair" the parting elements.
For any further informations, please contact the technical support TopSolid'Mold.
Topsolid online Help Index
