Orientation

Will allow you to orient a blade ejector.

If you insert the ejector pin on a circle or on a point :

• EJECTOR : select an existing ejector pin to copy its orientation angle value.

• VECTOR : define a vector by 2 points.

• Angle : enter an angle value to define the direction.

The angle is defined in reference to the X axis of the mold base origin.

• Direction : select a direction on the screen (line, edge, face, etc...).

If you insert the ejector pin on a straight edge or on a point, you can Deport your ejector. In that case, the system computes the position from the insertion point. You drive the "position" by picking the arrows on screen.

If you insert the ejector pin on a curve, you can Deport you ejector with tangency or not. ou drive the "position" by picking the arrows on screen.

Topsolid online Help Index