AUTO : The program recognises
the ejection system and inserts the ejector between the ejectors plate
and the ejectors
plate et la ejectors
retainer. This is the positioning mode by default.Positioning mode
2 positioning modes are proposed:
AUTO : The program recognises
the ejection system and inserts the ejector between the ejectors plate
and the ejectors
plate et la ejectors
retainer. This is the positioning mode by default.
In the case that there are more than an ejection system, the program will ask on which ejection plate the ejector pin should be inserted.
MANUAL: This mode is used when
you want to insert an ejector pin outside of an ejection system.
Select the positioning face.
Select the limitation element for the ejector.
NO LIMITATION : the ejector pin will be inserted with a length corresponding to the selected code.
AUTOMATIC LIMITATION : the system will apply the limitation rules for ejector pins.
Limitation element : when you select the element limiting the length of the ejector.
Topsolid online Help Index