Undersize

The undersize values are radius values.

Planar orbit

The undersize is applied in a XY plane (/Z diving direction of the electrode).

The software "removes the fillets", applies the undersize, then re-inserts the fillets with their first values.

Spherical orbit

The undersize is applied in all directions.

If it needed, the software removes the fillets, is for example undersize>Radius.

Undersize value is not an associative value. z Les valeurs de sous-dimension ne sont pas associatives. Its modification afterward will not be put back on the geometry of the electrode.

Topsolid online Help Index