Create an electrode on sheet

Icon access:

Menu access: Electrode | Create

Description:

Creation of an electrode on a sheet.

General philosophy:

1. Select the previously created sheet. The strategy used for the sheet creation will be the one applied foe the electrode creation.

2. Fill the tabs to define your electrode:

3. General

4. Extra parameters

5. Additional data

6. Electrode positions

The first tab General will change regarding the strategy used for the sheet creation.

Specific point(s):

Electrode base and/or CSYS modifications are allowed only during modification step (not accessible during the electrode creation).

When you will fill the table, you can go from a cell to another one by pressing TAB.

ENTER will create the electrode.

If the healing succeed, it creates an operation line the symbolic tree. The remove operation is named with the same name than its electrode.

If the healing succeed, it creates a representation of the part to machine. You can change the representation from the tree, to recover the status of the part without the healing.

You can delete the operation without any risk for the linked electrode. On the contrary, the suppression of an electrode will also delete the healing operation linked.

Available modification(s):

It is possible to modify the electrode after its creation with the function .

Topsolid online Help Index