|
|
|
|---|
|
|
|
|---|
Section
Menu: Measurement | Section
Icon: 
Links:
Create a measure of a section of the part.
The measured points will be situated on the associated faces.
The section can be consisted of segments, arcs, profiles, splines....
The section has to belong to the part.
2 modes of selections of sections are proposed:
By selecting a point belonging to the part.
Then the axis of the section is required (the axis of the section is defined in the current Wcs)
Finally, the faces of solids concerned for the creation of the section are selected in the dialog box
-By activating the CURVES button
In this case, just
select an existing curve section or several curves by using the 
icon.
All the curves must be situated on the faces of the part.
Select the menu
"Measurement | Section" or click the icon.
Select a point and an axis to define the section or use the CURVES button.
The dialog box of the operation and the pre visualization of the tool path appear. Modify some parameters if necessary and confirm.
Links :
Click the various zones of the image below to have
help
Topsolid online Help Index
