Oblong
Menu : Measurement | Oblong
Icon:
Links:
Purpose
Understanding the function
How to use
Dialog box
Create a measure of a set of points on an oblong of a part.
The measured points will be situated on the associated faces.
The oblong HAS to belong to the part
There are two ways to select the oblong
In that case, just select the edge path of the oblong (Red and white edge in the above sample)
in that case, use the icon to select the four faces of the oblong. (green faces in the sample above)
The oblong can be an internal an external oblong.
The two extremities are constituted with arcs or segments.
Select the menu "Measurement | Oblong" or click on the icon.
Click on the button to select the edge of the oblong or on the to select the four faces of the oblong (by using the icon).
The dialog box of the operation and the pre visualization of the tool path appear. Modify some parameters if necessary and confirm.
Links :
'Control conditions' tab
'Machine parameters' tab
'Information' tab
Click the various zones of the image below to have help
Topsolid online Help Index
icon to select the four faces of the oblong. (green
faces in the sample
above)