For a distance, values are given
in mm, and for angles values are given in degree and decimal.Tolerance
This field specifies the acceptable tolerance for the controlled dimension.
Two kinds of tolerance can be applied:
Tolerance Class
It's defined by a letter representing the position in the interval of tolerance and a number to specify the degree of tolerance.
Examples:
H8
h7
g6
Minimum deviation / Maximum deviation
It's defined by a minimum value and a maximum one
Examples
-0.1/0.3
0.02/0.05
-0.06/-0.04
For a distance, values are given
in mm, and for angles values are given in degree and decimal.
Topsolid online Help Index