|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Location - positional
Menu: Control | Geometrical | Location - positional
Icon: 
Links:
Create an instruction of control of a location or a positional tolerance.
The instruction will be TOL/POS in the DMIS file.
Definition of the location- positional :
The tolerance area is limited with a cylinder of diameter (if sign diameter is present) equal to the given tolerance, of which the axis is in the in theoretical exact position of the considered line.
It's necessary to select at least two elements, and at most four elements.
This elements can be :
A measurement already done (measurement of a line, circle, plane or cylinder)
A geometrical element (line, circle, plane or cylinder) on which an operation of measure will be in advance created if it's not done yet.
The first element is the element to control, the other elements will be the referenced element.
Select the menu
"Control | Geometrical | Location - positional" or click on
icon.
Select the element to control (line, circle, plane or cylinder, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
Select the referenced element(s) (line, circle,
plane or cylinder, measure). Use the icon 
to select more
than one element
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
A dialog box appears. Modify some parameters if necessary and confirm .
Click the various zones of the image below to have help
Topsolid online Help Index
