|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Cylindricity
Menu: Control | Geometrical | Cylindricity
Icon: 
Links:
Create an instruction of control of a cylindricity tolerance.
The instruction will be TOL/CYLCTY in the DMIS file.
Definition of the cylindricity:
The surface must be included between two coaxial cylinders where the radius differ from the given tolerance. The external cylinder is the smallest confined cylinder.
It's necessary to select one element.
This element can be :
A measurement already done (measurement of a cylinder)
A geometrical element (cylinder) on which an operation of measure will be in advance created if it's not done yet.
Select the menu
"Control | Geometrical | Cylindricity" or click on icon
Select the element (cylinder, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
A dialog box appears. Modify some parameters if necessary and confirm
Click
the various zones of the image below to have help
Topsolid online Help Index
