|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Concentricity - Coaxiality
Menu: Control | Geometrical | Concentricity - Coaxiality
Icon: 
Links:
Create an instruction of control of a concentricity (for circles) or of a coaxiality (for cylinders) tolerance.
The instruction will be TOL/CONCEN in the DMIS file.
Definition of the concentricity:
The center of the referenced circle must be included in a circle of diameter of the required tolerance, concentric to the center of the reference circle A.
Definition of the coaxiality:
The axis of the referenced cylinder must be included in a cylindrical zone of diameter of the required tolerance, coaxial to the center of the reference circle A.
It's necessary to select two elements.
This elements can be :
A measurement already done (measurement of a circle, cylinder)
A geometrical element (circle, cylinder) on which an operation of measure will be in advance created if it's not done yet.
The first element is the element to control, the second one is the referenced element.
Select the menu
"Control | Geometrical | Concentricity - Coaxiality" or click
on icon
Select the element to control (circle, cylinder, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
Select the referenced element (circle, cylinder, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
A dialog box appears. Modify some parameters if necessary and confirm .
Click
the various zones of the image below to have help
Topsolid online Help Index
