|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Distance
Menu: Control | Dimensional | Distance
Icon: 
Links:
Create an instruction of control of a distance with its tolerance.
The instruction will be TOL/DISTB in the DMIS file.
It's necessary to select two elements.
Each of these elements can be :
A measurement already done (measurement of point, cylinder, plane, ...)
A geometrical element (point, cylinder, circle, plane, ...) on which an operation of measure will be in advance created if it's not done yet.
Of course, TopSolid'Control uses the
Select the menu
"Control | Dimensional | Distance" or click on the icon.
Select the first element (Face, point, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
Select the second element (Face, point, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
A dialog box appears. Modify some parameters if necessary and confirm.
Click the various zones of the image below to have help
Topsolid online Help Index
