|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Angle
Menu: Control | Dimensional | Angle
Icon: 
Links:
Create an instruction of control of an angle with its tolerance.
The instruction will be TOL/ANGLB in the DMIS file.
It's necessary to select two elements.
Each of these elements can be :
A measurement already done (measurement of a line and cylinder or cylinder and plane)
A geometrical element (cylinder and plane) on which an operation of measure will be in advance created if it's not done yet.
Of course, TopSolid'Control uses the
Select the menu
"Control | Dimensional | Angle" or click on the icon.
Select the first element (circle, cylinder, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
Select the second element (circle, cylinder, measure).
If the element is not a measure,
It's possible to use the existing measure (if the element was already measured) or to make again the measure.
The measure will be done in automatic before the control if no measure was done.
A dialog box appears. Modify some parameters if necessary and confirm.
Click the various zones of the image below to have help
Topsolid online Help Index
