|
|
|
|---|
|
|
|
|---|
Topsolid online Help Index
Circle intersection Plane / Cone
Menu : Construction | Circle | Inter. plane / cone
Icon: 
Links:
Create an instruction of construction of circle resulting from an intersection between a plan and a cone..
The DMIS output will be like CONST/CIRCLE,F(ident),INTOF,reference1,reference2,reference3, ....
It is necessary to select two elements.
The first element is a measure of a plane or a construction of a plane or a geometrical element plane on which an operation of measure will be in advance created.
The second element is a measure of a cone or a construction of a cone or a geometrical element cone on which an operation of measure will be in advance created.
The created element is a circle, so the axis of the reference cone and the plan must be perpendicular.
To select an element, there are two methods:
Graphic selection
Give the name of identifying it (example: MPLN_XX (xx is a number))
Select the menu"Construction
| Circle | Inter. plane / cone" or click on the icon
Select the first element (plane, measure of a plane).
If the element is not a measure, it is asked to use existing measure if the element was already measured
Or an operation of measure will be in advance created.
Select the second element (cone, measure of a cone).
If the element is not a measure, it is asked to use existing measure if the element was already measured
Or an operation of measure will be in advance created.
A dialog box appears. Modify some parameters if necessary and confirm.
Click
the various zones of the image below to have help
Topsolid online Help Index
