|
|
|
|---|
|
|
|
|---|
Topsolid CAM online Help Index
NC fixed cycles
Links:
This dialog box allows to define how the user wants to output the roughing cycle of TopSolid'Cam in the ISO code.
If this parameter is not activated, the ISO is decomposed into simple movements (segment, arcs, ) like in TopSolid'Cam.
If this parameter is activated, the ISO will call a specific machine roughing cycle (Example: G71 for Fanuc, G64 for Num,). In this case, the ISO will be shorter. BUT the simulation in TopSolid'Cam will not represent any more the reality of the machine.
|
|
Check this parameter to output the ISO cycle.
Check this parameter to output the finish cycle in the ISO roughing cycle. It's the offset on faces to give to the ISO cycle to be able to output also the finishing pas.
It's the offset on diameters to give to the ISO cycle to be able to output also the finishing pas.. |
Topsolid CAM online Help Index
NC fixed cycles