|
|
|
|---|
|
|
|
|---|
Topsolid CAM online Help Index
Groove roughing
Icon: 
Menu: Turning | Turning | Groove roughing
Links:
Remove with a grooving tool the material between the stock and finish part, taking into account possible offsets, by making successive and parallel plunges, according to the tool axis.
The machining takes into account the possible limitations fixed by the user and the geometrical characteristics of the tool.
Select the "Turning
| Turning | Groove roughing" function or click the icon
If there are several parts, indicate the part to machine.
Click the starting face (or the starting element) for the machining.
Select the last face (or last element) on which the machining should finish. The user can select
The button STARTING FACE or right click when the beginning and end faces are identical in topological mode.
The button ENTIRE PROFILE or right click in automatic mode to machine all the profile.
The button STARTING CURVE when the beginning and end entities are identical in automatic mode.
Select the tool to use for the operation.
Specify the different parameters in the tab dialogue box which appears.
Enter the comment which appears on the machine block listing meant for the NC operator. This comment will also appear when the user wishes to take a look at or modify an operation, using the Operation/ Operations manager function.
Eventually, enter a codified remark which will be interpreted by the post-processor, in a specific manner predefined by the user and the post-processor redactor.
Validate entries made into the dialogue box by clicking on OK.
The user can use the Topological mode or the Automatic mode to access to this function
Links:
'Driven points/Finishing pass' tab
Click
the various zones of the image below to have help
|
|
Topsolid CAM online Help Index
