|
|
|
|---|
|
|
|
|---|
Topsolid CAM online Help Index
Absolute movement
Icon: 
Menu: Turning | Movements | Absolute
Links:
Move manually the tool on various points. These points are defined in the Wcs by their absolute coordinates.
Select the menu
"Turning | Movements | Absolute" or click the icon.
If there are several parts, indicate the part to machine.
Question below
appears:
If the user selects :
YES, the new movement will be defined with the current tool at the END of the program.
NO, he will have to choose another tool to make the new movement at the END of the program.
An existing operation from the list, the new movement will be done with the tool used by this selected operation. This new movement will be placed
at the end of this selected operation if the user selects the END option
before this selected operation if the user selects the BEFORE option.
Specify the different parameters in the tab dialogue box which appears.
Enter the comment which appears on the machine block listing meant for the NC operator. This comment will also appear when the user wishes to take a look at or modify an operation, using the Operation/ Operations manager function.
Eventually, enter a codified remark which will be interpreted by the post-processor, in a specific manner predefined by the user and the post-processor redactor.
Define all the
points of the tool path by picking or with their coordinates.
Check the feed rate to use for each point (RAPID or WORK).
Close the tool path with the STOP button.
Links:
Click the various zones of the image below
to have help
|
|
Topsolid CAM online Help Index
