Apply same angles on stock

According to the stock, it's sometimes necessary to use different angular sections for the finish and stock part.

If this parameter is activated, all the angular values of the finish part are also used to cut the stock.

• It's useful if the stock is quite the same solid as the finish part.

If this parameter is deactivated, the user can define specific angular sections just for the stock.

It's useful if :

• The stock is a cylindrical stock (in this case only one angular section (at 0°) is necessary.

• The stock is not circular , but different from the finish part (stock which is coming from a milling operation for example).

Topsolid CAM online Help Index