|
|
|
|---|
|
|
|
|---|
Topsolid CAM online Help Index
Visualize
Icon:
Menu: Part | Visualize
Links:
Purpose
Specify the default criterion for visualizing the TopSolid'Cam part.
How to use
Select the menu "Part | Visualize".
Configure the visualization
Stock
Visualization
No: The solid representing the stock model is made invisible.
Transparent: The solid representing the stock model is made transparent.
Solid: The solid representing the stock model is made opaque (no transparency)..
Material
Global: The whole of the stock model is displayed.
Left over: Only the left over material is displayed. In fact, TopSolid'Cam performs a boolean subtraction operation between the solid representing the stock model and the solid representing the finished part. This option is useful when the user needs information on rest material.
Finish part
No: The solid representing the finished part is not displayed. This mode is mostly useful when the user wishes to see only rest material (Left over option in material visualization).
Yes: The solid representing the finished part is displayed.
Turning
Use turning visualization: Useful for turning part only. In this case, it's possible to see the part opened (fine to understand the internal operations).
Cut start angle: Initial value for the cutting section
End angle of cut: Final value
With
multi parts documents, if the stock and finish parts are all hidden, to
be able to modify one, as TopSolid'Cam asks the user to select the part to modify
(which is invisible now!) just click on the part Wcs
Topsolid CAM online Help Index
