|
|
|
|---|
|
|
|
|---|
Topsolid CAM online Help Index
Plunge pocketing
Menu: Milling | Plunge machining | Plunge pocketing
Links:
Removes all material perpendicular to a side, between the finished part and the stock model, by respecting the side’s natural edges and its possible islands.
TopSolid'Cam realizes successive plunges (drilling) to make this machining
The plunge pocketing cycle deals with faces having simple and complex contours. The presence of islands or corners with a radius smaller than the tool’s radius does not alter the computation. On the contrary, TopSolid'Cam in this case will generate leftover material that will be detected in later machining operations.
When setting the parameters in the dialog, the machined area can be displayed with an interactive X hatched area.
Topologic mode
Select a face from the part to machine
Confirm the ’Plunge Pocketing' operation
Select the tool to use for the operation
This option is available when the topologic analysis engine detects a flat, horizontal side with all edges corresponding to vertical and ascending sides. This operation is carried out, relative to the current positioning.
Islands found in the middle of this side are also automatically detected.
Warning:
Please note : The user may wish to machine a pocket with no horizontal side (a bottomless pocket). In such a case, the user must click on one of the ascending, vertical sides and choose the rest machining option, instead of the offered contouring operation.
Automatic mode
Select the curve to pocket
Select the face from the part on which the machining operation will be based, or input the altitude of the operation
Select the tool to use for the operation
he user can eventually click on the ‘Info’ button in order to know the geometrical characteristics of the face to machine (Area, minimum radius, total height, etc..).
Links:
Click the various zones of the image below to have
help
|
|
Topsolid CAM online Help Index
